• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

Archive through June 19, 2009

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
*New Kohler Cam Cover and Dipstick, part numbers #237013 and #237623-$70 shipped
*IH Owners Manual for 800,1000-1450,1650, NICE-$20 shipped
*IH Parts and Service Manual AD-11-D, NICE-$25 shipped
*3 point hitch for 106,126,107,147 complete with bottom u bracket that bolts to transmission-$85 PLUS shipping
*3 point for other narrow frames,same as above-$65 plus shipping
*Cub 72 no fenders with a smoking 8hp engine-$225
*I have a 482/1100 Briggs 11hp engine in PIECES-email or call for prices and parts availabiltiy!!
Call 937-638-2003 AFTER 4PM or [email protected]
153810.jpg

153811.jpg

153812.jpg

153807.jpg

153808.jpg

153809.jpg
 
I have 3 IH Cub Cadets for sale.
The 1st is a 70. Serial # 73101 (Dec. 1963) 7hp runs good with a little smoke $250.
The 2nd is a 73. Serial # 344744 (May 1970) 7hp runs good. Has mower deck and round rear fenders $350.
The 3rd is a 104. Serial #306286 (Aug 1969) 10hp runs good. Has mower deck and fenders $350.

Cash and Local Pickup only. Thanks.
 
New stainless steel sleeve hitch adapter.

The lift arm is 2" 1/2" ss bar and is bent in onw piece.
The pin tube is 1 1/4" ss round bar machined for a 5/8 pin.
The lift straps are 1 1/4" x 3/16" ss
All pins included. $150 plus shipping or pick up here.

The inside dimension of the lift are is 9 5/16" +/-
153912.jpg




153913.jpg
 
Cub cadet 70
It runs but smokes.
The S/G charges at 14.2 volts
It shifts but the clutch plate hangs up on the shaft because it is rusty. No rattles from it, maybe after some more use it will free up.
Tank is clean inside very shiny.
It does not have a pto on it.
It does not have the original key switch on it,but it has a working one on it.
It is missing the grill and the choke cable but I have a cable for it.
Rebuilt the carb.
new head gasket.
One front tire will go flat in a few days.
$250.00 or best offer.I am willing to del. on this
153977.jpg

153978.jpg

153979.jpg
 
Cub Cadet 1440 Super Steer front axle assembly with spindles, drag link, pitman arm, and tie rod. Convert your old IH Cub Cadet to better steering. It will make your tractor turn much tighter radius'. I have sold lots of these for this purpose with great results. $125 plus shipping. This is the last one I have. I also have the matching wheels and tires that are $20 each or $35 for the pair plus shipping. 434-996-5549.
 
IH Cub Cadet model 73 with CREEPER gear box. Nice straight tractor with 4 brand new tires and a cleaned & rebuilt creeper box. Great steering wheel. Very nice solid pan seat. No welds. Also has decent deck. $395.00


153988.jpg
 
Brinly cat 0 moldboard plow, shiny plow share, newer black frame, metal gauge wheel and coulter. Asking $195obo picked up here in Kokomo Indiana. Thanks Mike
 
Pic of the cat 0 Brinly plow I have for sale. Thanks Mike
board-post.pl
 

Latest posts

Back
Top