Help Support IH Cub Cadet Tractor Forum:
lpalma
- Messages
- 1,334
- Reaction score
- 454
Latest activity Postings About
-
-
lpalma reacted to mgonitzke's post in the thread Parts for rebuilding the steering column on 100 with
Like.
No. It won't matter how you position the cam plate when you install the follower. Drag link length is how the left/right bias is adjusted. -
-
lpalma replied to the thread My sixth..a 1984 682.You should crop that out then as it may confuse others...
-
Those are release valves, and if they are leaking from the hole on top, they need to be rebuilt or replaced.
-
lpalma replied to the thread My sixth..a 1984 682.So does it come with the carb gasket?
-
This one kinda ran rough and I was not able to get acceptable performance from it. Since it ran beautiful in it's original tractor, my...
-
9 out of 10 times it's not the solenoid. Bad ground Bad battery cable Bad or weak battery
-
One nice day I took a picture of my cub cadet. My wife thought I was crazy. But I had fun.
-
lpalma replied to the thread 982 headlight frustrations.Do the tail lights work?
-
lpalma reacted to mgonitzke's post in the thread Mower deck and plow will not extend but retracts fine with Like.
The control valve mounting bracket has probably slipped on the steering column a bit and needs to be re-positioned.
-
There are three spiral pins in the driveshaft. Are all three intact? Does the hydraulic lift still work? When is the last time the fluid...
-
lpalma replied to the thread Hydrostat in 1811 stopped pulling.Maybe the linkage fell off on the cam plate or off the go-go handle connection.
-
lpalma replied to the thread Parts Wanted 1864 or similar chassis for power steering parts.Easier to take your 1863 parts and put them on a 1864 donor if has no motor. You will have to remove all the plastic, engine, and...
-
lpalma replied to the thread 782D journey.Yep, as long as you have good ground on the dash tower to frame. I put 2 star washers on my 1512, was it necessary? or was it a waste of...
-
-
Loading…
-
Loading…