Archive through April 08, 2013

[hydroharry]

Ok Guys - here's a nice Narrow Frame 3 Point Rear Lift with Brinly Spring Assist. This is complete except for a few washers, cotter pins and an R-clip. The U-bracket (lower 2 points of the 3 point) has a wallowed hole but should still work fine, you just need to keep the bolt tight. Price is $150 plus shipping from zip code 06798.

Also, still have the Plow, Cultivator, Disc and Creeper listed previously. Could make a nice package deal if you pick everything up in CT. Or could have it transported for a small fee to the PA Plow Day, also known as the Danville PA.
plow day.

 

[cmcclain]

Picked up a narrow frame hydraulic lift assembly recently for one of my 100's, and decided that I really don't need it...Asking $275...The unit is also posted in the trading area of the forum.


Call/text me at 765-265-3078 or email me at [email protected] ...Located in Cambridge City, IN.

 

[jboelens]

My buddy has a Cub Cadet 111 lawn mower for sale. Has a mower deck, Briggs runs and gear drive moves. Located in Polo, IL $150

Can call or text me 1.815.535.3147

 

[akaufman]

I have a 1961-62 Cub Cadet Original front blade and mount for sale. It is definitely not a show piece, but it would be usable, and with a little work could be restored. The springs and skid shoes are missing, and the original lift bar bracket has been removed and a newer style custom lift bracket has been welded to the lift frame (looks like quality work). I would like to get $100 for the blade and mount. It is located in Southwestern Indiana, just North of Evansville.

 

[twwilliams]

1963 Model 70 - $500

s/n 79421
engine s/n 1715602422

Has 42" mowing deck with rebuilt spindles. Used to mow ~ 1 acre for three years since rebuild.

Location: Lebanon, NH 603-667-1743

 

[cmcclain]

Guys, the hydro lift unit is still available. I am going to lower my price to $250 shipped to your door. [email protected] PH: 765-265-3078

 

[dcmay]

Since I am at the age where it takes 5 min to straighten up after bending over working on these c/c,I am selling everthing Yellow &
White.
Original w/deck
122 w/Frt blade
102 & 129 for parts
106
125
125 completely disassembled
127
129
(2)1250s
1450
1450 w/peco bagger (rear mtd)
(4)44" decks
(3)48" "
(2)42" "
42" snow blade
K241
(2)K301s
K301-Quiet Line(rebuilt)
Also many,many parts:
(3) rebuilt s/g-(4) rebuilt carbs-(3)rebuilt strg gears-Voltage regulators-coils-condensers-pto clutches-gas tks-I could go on for another hour,as I have tinkered w/c/c since 1978.
I'm asking $6500 for everthing I have regarding Cub Cadets.

 

[cmcclain]

The NF hydraulic lift has been sold, pending payment.

 

[hydroharry]

Narrow Frame 3 Point Rear Lift with Brinly Spring Assist listed below is sold.
Still have the Creeper, Brinly Cultivator and Disc, and the turning plow shown on previous thread.
Spring is here guys, better get these things while you can.

 

[tbdavis]

Selling my '69 Model 126 tractor and mowing deck. Tractor is in original, unmolested condition with original paperwork. Deck is in very good condition with no holes. Tractor runs excellent and would make a nice restoration or put it to work. Price is $400 for tractor and deck or $500 for tractor, deck and snow blade. Located in Indianapolis, IN. Call/text (317) 966-9142.

 

[tbdavis]

Here's a pic of the 126 dressed in winter clothes.

 

[tbdavis]

Hey all - 126 is sold pending payment. Thanks.

 

[ksanders]

I have a lot of nicer stuff that really needs to stop sitting around.

106 Cub Cadet. (battery and 1 leaky front tire aired up and it runs and drives. Everything works, just a typical cub). $250

20HP Onan motor. (turns over but needs rebuilt due to smoking. No carb, pto, etc.) $100

70/100 headlight panel with good lights, complete set-up with switch, fuse, and wiring. $130

Round Fenders. Really straight but restored in IH red. $190

NF 3 pt. hitch and spring assist. IH bracket and rod on spring assist. Brinly pin. Very complete total set-up including 126/127/106/107/147 bracket. $200

Pan Seat with newer embroidered seat cushion. (had 1 weld years ago done right) $100 both

Brinly disk (front section/ great shape/ old style one/ needs paint though) $100

Also have a whole shed of thousands worth of parts from Cub Cadets, stack of tires, more uncommon parts, etc that I'll make one big package deal to clear out. More to come in the future as well. Shoot me an email and I'll be glad to get some pictures to you. Don't want to overload the thread with pics of everything.

 

[rmcshane]

Still have the 106, 123, and 71 for sale-give me a call at 319-929-0902. I'll be around all weekend!

 

[rdehli]

the 50 A deck listed on 4/6 has been sold thank you

 

[thoffman]

Even though it's still too feaakin' cold out, "Spring Cleaning" has begun!
One pair of 4.80-8 for narrow front rims BRAND NEW never mounted. Was going to use on project tractor but.........well you know. $35.00 <u>shipped</u>

BRAND NEW 15 X 6.00-6 tubes $12.00 <u>shipped</u>
Or $40.00 for tubes and tires. Will combine shipping on anything I have up for sale.
}

 

[thoffman]

Quiet line side covers $50.00 + shipping

Quiet Line Aluminum Upper Grill piece. $20.00 + shipping

Quite line <u>ALUMINUM</u>lower grill piece. Looks dirty in pix, but no cracks or welds. Nice. $35.00 + shipping

Will combine shipping on anything I have up for sale.

 

[mmasheris]

Complete dual hyd setup for 82 series new hoses and couplers,totaly reconditioned ready to go.$250.00 plus flat rate shipping of $12.00

 

[rmcshane]

The 129 listed for sale awhile back has been sold.

 

[hydroharry]

Ok Guys, the Creeper and Brinly Adapter are sold, but still have the Brinly Cultivator and Disc Harrow, and the unknown brand Plow posted on April 1. Still time to get these. Would make nice package deal.