FOR SALE- Cub Cadet 149. I am asking $500. It has some new parts including points, brakes, battery,and taillights. It has new wiring, new air filter,and the transmission oil and filter has been replaced. It needs a mechanical clutch. It has a rear lift for and extra $125.00.
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Archive through March 30, 2010
- Thread starter lday
- Start date
Help Support IH Cub Cadet Tractor Forum:
complete 682 roller with engine does not run no deck 300.00, parting out 2-kohler 18h.p. motors call or e-mail 740-687-1067 web site www.cubclassics.com
dylschmidt
Well-known member
- Joined
- Jan 20, 2007
- Messages
- 104
- displayname
- Darryl Schmidt
am selling some cub cadets to make room for my new project:
1966 102 runs very good. rubber seat in good cond. $350.
1966 122 runs ok.. creeper gear, lights...$400
1968 125 very nice..all it needs is paint $350
early 1250 fair/poor cond..... $300
[email protected] or 320-760-4138
1966 102 runs very good. rubber seat in good cond. $350.
1966 122 runs ok.. creeper gear, lights...$400
1968 125 very nice..all it needs is paint $350
early 1250 fair/poor cond..... $300
[email protected] or 320-760-4138
This was a trade deal that didn't come with 14hp motor. I just did a major fix up on a 127 and not feeling this project. Tractor looks to have been in storage for a long time. Frame and fenders are about as mint as you'll find to restore. Fiberglass dash had one hole drilled for some unused button (very unfortunate I know). Needs a good freeing up and going through, but hey... all around lights and electric lift. Two tires probably could stand replacing instead of tubes. An incomplete 12hp block goes with it. I'd rather not part unless there is no interest, as this one deserves to live on. $250 obo.
Also a 12hp motor from a QL 1200. 100% ready to go (I'd clean it up first). I fired it up before taking it out and it didn't shake and sounded good. No noises or anything. Complete with working front pto and motor mounts. One mount had a split piece of rubber I remember if you wanted to safeguard future possible trouble in advance by replacing it. You see it as it came from the tractor. $300
Also a 12hp motor from a QL 1200. 100% ready to go (I'd clean it up first). I fired it up before taking it out and it didn't shake and sounded good. No noises or anything. Complete with working front pto and motor mounts. One mount had a split piece of rubber I remember if you wanted to safeguard future possible trouble in advance by replacing it. You see it as it came from the tractor. $300
sblunier
Well-known member
- Joined
- Aug 4, 2006
- Messages
- 4,826
- displayname
- Steve Blunier "Mr. Plow" (Central IL)
FOR SALE
Sears brand Cat 0 (Sears type - Narrow 3 pt. connections) disk. Very heavy construction when compared to a Brinly. Bought it for a project that will probably never get off the ground.
$90 & free delivery to Rockford Plow Day.
Sears brand Cat 0 (Sears type - Narrow 3 pt. connections) disk. Very heavy construction when compared to a Brinly. Bought it for a project that will probably never get off the ground.
$90 & free delivery to Rockford Plow Day.
sblunier
Well-known member
- Joined
- Aug 4, 2006
- Messages
- 4,826
- displayname
- Steve Blunier "Mr. Plow" (Central IL)
FOR SALE
Brinly disk. Newer style stamped weight pan. Pictures are right after I painted it a few years ago, it has a few storage and use scratches etc. on it since then, but still is in nice shape.
$80 & free delivery to Rockford IA Plow Day
Brinly disk. Newer style stamped weight pan. Pictures are right after I painted it a few years ago, it has a few storage and use scratches etc. on it since then, but still is in nice shape.
$80 & free delivery to Rockford IA Plow Day
NF 3 point hitch with upper bracket, top link pin, and double lower bracket- $125
Headlights, tail lights off 126- $75
Various other parts- I'll deal
Prices do not include shipping
[email protected]
Headlights, tail lights off 126- $75
Various other parts- I'll deal
Prices do not include shipping
[email protected]
Brinly cultivator- $125
Brinly box scraper- $125
located in Tupelo, MS
Prices do not include shipping
[email protected]
Brinly box scraper- $125
located in Tupelo, MS
Prices do not include shipping
[email protected]
childebrandt
Member
- Joined
- Mar 8, 2010
- Messages
- 15
- displayname
- Curt Hildebrandt
I have a very intact Cub Cadet 482 for sale.....Been asking 300.00 but, make me a offer....We can talk....
bbrigham
Well-known member
- Joined
- Sep 4, 2006
- Messages
- 1,000
- displayname
- Brendan Brigham
I need to sell one of my tractors so guess it's gonna be my 73. Does not include the snow blade but will include the spring assist, 3pt, lights, and plastic coated 75# weights. It has a 301 in it that runs beautiful. The carb on it now has been borrowed from my Original so will need to go back on it. Any other questions just send me an email, it's in my profile. $400
Can also call my cell: 607-201-6798 it's Verizon
Can also call my cell: 607-201-6798 it's Verizon
Similar threads
Tractor For Sale
vintage cub cadet 125 refurbished for sale
