Archive through June 03, 2013

[hsell]

For Sale: Two cub cadet originals. One with rebuilt motor.. Price $ 500.00 One with three point hitch and older restoration.. $ 800.00 Phone 724 882-5806

 

[mmasheris]

127 and tiller are sold

 

[chosley]

IH Danco 33 snow thrower, a few runs on new bearings, stickers intact, everything tight.
Shaft & ujoints good. No gearbox. surface rust, never saw much use. $200.
St louis Area. call three one four - four two zero - zero five five two.

 

[apensyl]

1969 Cub Cadet 105
All original, never restored! Have original books and receipts for tractor and all attachements. It comes with a 36 " snowblower and a plow blade as well as the 42" mowerdeck. It has a 10 HP Kohler (as I'm sure you all know) and the hydro is very tight and has no leaks or drips. All decals, stickers and plates are as they were in '69. Never saw one this clean, but just can't keep it...the boss won't let me! Bought a zero-turn and won't let me have two, plus no room!

Asking $1800 for everything neg. Email or 5seven0-two seven 4-six 4 five 3.
Can email pics, they were too large to upload to the site. If you give me an email address I can send pics right from my phone.

 

[kmcconaughey]

Adam, if you email the photos to me I will post them for you. Email is in my profile.

 

[adunlap]

Price drop on the 1450 to $795. I can be reached at (260)615-5655. Thanks!

 

[thoffman]

And like that they disappear ....

 

[mmasheris]

 

[jmuncie]

#2 Cart Parts

Fenders $50 including shipping. Have some rust but nothing structural and it's all hidden.

Wheels $50 including shipping. Includes thrust washers and one center cap. The cap is in usable condition, not brittle. The tires are dry-rotted, but one holds air. Don't know about the other because it's off the bead.

Hitch $35 including shipping. Tongue needs straightened and spring is missing, but if you need a hitch this is a good one to work with.

 

[sreinbolt]

48" deck $75 OBO. Blades turn. I've never used-bought as package deal. Pick up here just north of Cinci

Baffles are gone.

Rust hole on right rear.

Broken weld on left side.

 

[kmcconaughey]

Scott, that is actually a 42" deck. It's overall width might measure out to be 48" but it's cut width is 42" and thus it is a 42" deck...

 

[kparker]

I have a Cub Cadet Original. 8hp Kohler engine. Rebuilt with less than 12 hours since. Runs and drives great. Paint looks good. Surface rust on rims. Has the original timed deck that operates great. Surface rust on deck as well. Asking $500obo

Also have a Red International Cub Cadet 782. (1980 model) runs and drives great. Has 42" mower deck and snow blade. 2200 original hours. Looks good. Asking $1100 obo.

Located in Warsaw, IN Can send pics. (574)549-3660(call or text) or [email protected]

 

[jsalatino]

Scott....Hey I've been looking for a smaller deck , I noticed you are locateed north of cincinnati. I'm off the mt.Healthy exit,275. Would you happen to have a phone number I can call you,My Cell number is 513-319-1081.I'm very intristed ...thanks

 

[sreinbolt]

Jonathan: call me at (937)218-1041. I'm in Blanchester.
Kraig: thanks for the info.
Jonathan: It's actually a 42" deck, not a 48",

 

[lpalma]

1 set of new tailight lenses for the 86-1650.Both have broken edges on them but just turn them upside down and it will never be seen.

$22.00 includes shipping

 

[hydroharry]

Lewis Do-Da - what are the last 2 digits on each of those lenses? 70 or 75?

 

[lpalma]

One is reflectolite the other is bargman #75

 

[thoffman]

Selling some surplus wide frame parts

Aluminum upper and lower nose piece for QL $20 ea. or $30. for the set.
Headlight panel with all the rings, bezels and working lights (44-11's). $50.
One fiberglass dash for 86-169 and two for a QL $20.ea.
Hood for 86-169 and QL $20. ea.
PTO handle for 86-169 $10.
Non-melted 86-169 plastic grill with IH emblem $25.
Mower subframe for 86-169 $25.
Pretty nice 48" mower deck with no rust though but missing center spindle $25.
Steel fuel tank for 12X and up small dents on bottom but clean, no leaks and solid. $25.
Solid running K-321 $125.
149 roller with ALL hydro lift parts $ 100.

Add shipping to all parts. Some of this stuff is pretty big to ship so pick up would be great. Maybe you can find a ride for this stuff the to the Red Power Round UP??

Email for photos. Have more 86-169 and QL stuff call/email 815-575-3797

 

[jmuncie]

#2 Cart hitch is sold.

 

[kshultz]

#1 rototiller with both extensions plus gear box.
All works good and is tight. Real good tines.
$450 picked up in sunny Albion, IN.