Guys,
Thanks for all the nice comments. It makes it all
worthwhile.
Kraig,
I'll send some pics to you.
To answer all the questions;
Paul A,
I used a double stackable valve from a newer CC
3000 series GT. The levers and linkage is all fabricated, patterned after the QL setup. The lines are all 3/8" brake tubing.
The air cleaner is the stock base with a longer stud and the lid is from a KT-17.
Kentuck,
That is a QL nose.
Tyler T,
I robbed too many tractors to count. 82 series
steering gear and wheel, QL nose and lights, 3000 series valve, 82 series driveshaft, etc...
Justin M,
I made the grille inserts out of 1/8" aluminum.
I cut Them out with a jigsaw.
Brian W,
That is a farmall cub muffler. The pipe is made up from a 45 and a 90 deg 1-1/2" exhaust pipe elbows cut and welded together.