Wanted to double check on the fitment of these subframes and blades. The Yeller one is a narrow frame drilled for a hydraulic angle blade,correct? The white one is a wide frame drilled for a hydraulic angle blade? The last one is a wide frame that is not drilled?
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Double checking my double checks
- Thread starter Ron Armbruster
- Start date
Help Support IH Cub Cadet Tractor Forum:
The rusty one is a NF unit like would go on a 126
Ditto in the yellow one.
The white one is a WF unit for sure
Yes, the extra holes are for mounting the hyd angle parts.
The 3 holes are for the cylinder body mount which bolts to tghe underside of the 'A' frame with the pin pointing down.
There should be 2 more holes in the lower pivot, left side, just below the lower spring mount pin, for the cylinder rod mount with the pin pointing up.
Ditto in the yellow one.
The white one is a WF unit for sure
Yes, the extra holes are for mounting the hyd angle parts.
The 3 holes are for the cylinder body mount which bolts to tghe underside of the 'A' frame with the pin pointing down.
There should be 2 more holes in the lower pivot, left side, just below the lower spring mount pin, for the cylinder rod mount with the pin pointing up.
The really rusty one is a narrow frame, the yellow one is a narrow frame and the white one is a wide frame. The white wide frame one appears to have a home made lift bracket on it.
Similar threads
