• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Archive through October 24, 2009

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bruhman

Well-known member
Joined
Dec 16, 2008
Messages
100
displayname
bruce ruhman
Allis- Chalmers , single bottom plows, built for their garden tractors, brand new, got from defunked dealership, they have id tags on them , both are 12 inch one old style one new style. probably built by brinly. $300. each 207-838-0001
 
Bruce: That dealership may have also had it's funky removed, but being no longer <u>funct</u>ional is spelled de<u>funct</u>. That's just in case you wanted to know...
old.gif
 
I have for sale a Davis Taskforce backhoe with push blade crawler. It has a strong running 2 cylinder Wisconsin engine. And comes with the original tilt trailer which I have the title for. This is a handy little unit that I just don't use enough.

$4500 OBO

180055.jpg


180056.jpg


180057.jpg


180058.jpg


No emails please.

Contact Jack at 715.897.3188
 
Book, 1st 50 years of the Grand Old Opry. 364 pages, 463 illustrations. A book in good condition for the colector or just to read. $30.00 + shipping. Addy in profile.
180422.jpg
180423.jpg
 
I'm looking for some down draft carbs that were used on the 16 and 18 Twin Briggs motors. I'm planning on bolting them directly on top of the Pontiac 3.1 manifold instead of using the plenum. I hope to use 6 of them with stacks through the hood like old Hilborn type injectors.
 
Allis -Chalmers plows. One complete, one missing frog,coulter,and yoke. $300. for the complete. And $150. for other. 207-838-0001

181032.jpg


181033.jpg


181034.jpg


181035.jpg


181036.jpg
 
1974 JD 110 with snow plow and mowing deck(46") and tire chains. I have a better seat to go with it. Need to sell to buy more cub stuff. $600 OBO

181047.jpg


181048.jpg
 
For sale john deere 216.
It has a hydrolic lift , spring assest,and a good 48 inch deck over all a good tractor but NEEDS a motor still have old one but brock a rod.
wiil trade for a IH cub cadet cozy cab or for $400 just the lift alown is going for that on ebay.
email [email protected]
 
N.O.S. Allis Chalmers Garden tractor seat. Index card said it was put in stock in June of 1973. Does not say what tractor it fit. $75.00 . 207-838-0001

181101.jpg


181102.jpg
 
1968 sears suburban 12 garden tractor. new paint on tractor and deck. all in real good shape. tractor will start right up, but needs head gasket. runs and charges good, good original tires. needs a battery also.$250.00. can send you email pictures if interested.
 
181218.jpg

181219.jpg

181220.jpg

IH Flo-rater, Excellent condition. Came from an old dealership. $700.
 
I have a early Case IH Lighted dealer sign. This is a large sign. It is 101" long x 53" tall x 14" deep. The vinyl center of the sign is in good shape. There is a scuff (not ripped) on one side. One bottom corner of the frame has a slight dent that needs popped out. Bulbs will need to be replaced. I also have the original 6" x 6" x 13 ft. square steel mounting post. The sign is in very good shape for its age. I will take $900.00 for everything. I am located in central Indiana.

181468.jpg
 
6 cans in un-opened box.Lacquer spray paint. OEM paint primer surfacer, as written on label. $ 100.00

181474.jpg


181475.jpg
 
Looking for a 4 speed uni-drive transmission for a wheel horse. I only need axles if you have a bad trans you want to part.
 
I didn't want to do this, but I have enough parts to build one Case model 446 and have some left over. This project unfortunately never went any where and I need to sell it. I'd like to get what I have into it $200 but will take an offer. I'm not a big fan of online auction sites so I'm starting here first. Email is in my profile.
 
Looking for power steering orbital valve from a garden tractor or some other small equipment. Brand doesn't matter. I just want something I can adapt to work on a 126. Let me know what you have and how much you want for it. Thanks, Jerry
 
An older Cat Mini Bike. I am the original owner! I had this running about 3 years ago, but haven't tried since. Will probably need a carb cleaning. Comes with original paperwork. No shipping, you must pick it up in Massapequa, New York 11758. My email is [email protected] asking $300.00 0r will trade for a complete hydraulic lift for a model 100; or maybe some other cub cadet tractor or stuff - let's talk. Thanks, Greg

182124.jpg


182125.jpg
 

Latest posts

Back
Top