Archive through November 20, 2015

[prtombaugh]

Get ready for spring tilling. I have a Cub Cadet tiller gearbox in very good condition. looks like it was always stored inside - just a little dusty. You won't be able to find one of these next spring when you need it! $140 plus actual shipping. I can send more pictures.

 

[prtombaugh]

Category 0 to Brinly sleeve hitch adapter. No hardware included. White powder coated. Very well made. $90 plus actual shipping. It weighs 22 pounds. Can also deliver to AJ's Garden Tractor Jamboree 2016 in Oregon, IL; Red Power Roundup 2016 in Union Grove, WI; Blunier's Plow Day 2016 near Roanoke, IL if paid for in advance. Or you may pick it up here in Northern Illinois.

 

[prtombaugh]

Cub Cadet Original 38-inch mower deck. Pretty solid with a little pitting and one very small hole. Spindles spin freely and sound good. Includes just about everything you need to mount it. I found the hangar straps after I took the pictures. Spindle guards are very good.Includes a mule drive but the pulleys don't spin well. Good timing belt. Includes gauge wheel brackets but no axle arms or wheels. Two decent blades included. Shipping options can be discussed or I can deliver to AJ's Garden Tractor Jamboree (2016) in Oregon, IL; Red Power Roundup (2016) in Union Grove, WI; or Blunier's Plow Day 2016 near Roanoke, IL if paid for in advance. $140

 

[cwestfall]

SOLD!

package deal muffler extension, exhaust deflector, fits quite lines 30.00 plus 8.00 shipping

 

[cwestfall]

SOLD!

n.o.s.snow plow lift rod bracket 15.00

 

[prtombaugh]

Tiller gearbox is sold. Thanks to all who inquired!

 

[prtombaugh]

Lift rod for Cub Cadet Original. This is the rod that runs between the frame rails for lifting the front blade. Still has some original paint. All the twists and bends appear to be in the right places. A better deal at $40 than the reproduction one for $55.
Buyer pays actual shipping.

 

[prtombaugh]

Walbro carburetor off a Kohler k241 engine. This is as close to new as you can get! I bought a Cub Cadet 100 (10 horse) tractor a couple years back. It had a correct replacement Kohler k241 engine in it. The neighbor of the deceased gentleman, who owned the tractor, said the tractor was operated less than 10 hours with the replacement engine. I recently restored the tractor, but did nothing to the engine except replace this carburetor with a rebuilt Carter #26. $40 seems fair. If you don’t like it when you get it, I’ll take it back.
The only numbers I can see on the carburetor is a 47 053 88 and 73-1794.
Contact me if you have any questions.

 

[kshultz]

The narrow frame snow blade is sold.
Thanks!

 

[prtombaugh]

The Walbro carburetor is sold. Thanks to those who inquired.

 

[prtombaugh]

Black Friday Sale. The Cat 0 / Brinly sleeve hitch adapter price is reduced to $80. The 38-inch mower deck price is now $120.. Items were posted November 20th.

 

[prtombaugh]

The Cat 0 / Brinly sleeve hitch adapter is sold. Thanks to all who inquired!

 

[dschwandt]

FOR SALE: Brinley/Cat 0 adapter. Use all your sleeve hitch implements behind your Cat 0 3 point.
Includes hardware, does not include the A-frame assly.

4 available

$55 post paid in USA

Thanks!
Dave S.

 

[mmasheris]

Complete 3 point for Original all cleaned and painted new lift pin also.$175.00 plus shipping from South Elgin,IL 60177

 

[jjerome]

I have for sale a CC86, runs good, has new rear turf tires, creeper drive, mule drive, no mower deck, has rear lift. Needs carb kit. 300.00 OBO{3009\popjpeg27,CC86}


Also a partially restored 1650, it has rear lift with Brinly sleeve hitch, mule drive and mower deck, Kohler 16 HP engine has been overhauled. The frame, fenders and instrument tower have been primed and painted, has a new decal set. 700.00 OBO.

Also have a CC front snow blade complete 175.00 OBO.

Also a Brinly A frame sleeve hitch cultivator 125.00.

Location south central Oklahoma.

 

[jmhill]

Hey guys, I'd like to sell my nice IH Cub Cadet 782. It's one of the few International Harvester built '82 series. It's in very good condition and starts and runs excellent, but it does smoke. It's got the KT17 series 1. Comes with a solid 44c deck and a 42" blade. Asking $800. PM me here on the forum, or email in my Profile or call/text 309-822-2087

Thanks!

 

[mmasheris]

pictures of Original 3 point

 

[jdonovan]

Angle knob for back blade/rake. The new knobs appear to be pretty close if not exact as my NOS one (green x is the nos one). $10 each, shipping included. I have 5 available..

 

[digger]

Joe D.

Mine mine mine!!!!

 

[jdonovan]

knobs are spoken for. Thanks..