Archive through November 16, 2010

[lbury]

A huge thank you to Hydro Harry, got my parts today, am tickled pink, thanks again........Lyle

 

[glturney]

Brinly plow 3pt A frame. $120. I cam email you pics. Thanks

 

[lpalma]

Complete light set for a 71,102,122,123 cubs.
The panel is not bent and all the mounting studs are in good shape
It comes with new correct GE bulbs.
A new Grote lens is included. The only flaw is the switch to tailight wire has a cut in it.
No dents in the tail light,and has the original red primer inside.All wiring is included to make this a turn key set up.
Last one sold on the auction site for $235.00.
$185.00 plus shipping from Montague N.J.

 

[rdehli]

Better price on the cub cadet 1000 starts runs and drives asking $200.00 obo come and get it in NE Iowa

 

[rdehli]

For Sale

PRICE DROP
on the ih back blade now $375.00 picked up or plus actual shipping located in NE Iowa
would make a great Christmas present for any cub collector

 

[jbaker]

For sale 1976; 1200 with creeper drive
Strong running non smoking tractor will need battery and engine rubber mounts

Need $400.00

 

[jbaker]

parts tractor your choice 108 or 128 both mostly complete minus engine, seat, volt reg. it will come with a hood but is broken at the nose cone

108 is brake style pto lever...$108.00
128 is button style pto lever also has rear lights minus the lenses...$128.00

 

[glturney]

Cub cadet 102 need work some what complete can email pic Located in northwestern IL. $150 Thanks

 

[glturney]

147 frame front cast, dash, steering wheel.$ 50 located in northwestern Il can email pics thanks Lee

 

[dpetroline]

sold 582! thanks dustin

 

[T-Mo]

123 roller for sale - was repainted a few years back - still looks great. Will have different tires and rims on it than pictures shown. $100 obo

Your choice of either a 42 inch or 48 inch pin on deck for the 1x2/1x3 series. Both good shape. $75 for each

10 hp fuel tank, clean. $25 plus shipping

107 frame with transmission: $50 obo

Also many more parts, including hood, grille, for the 107.

All located in Bonne Terre, Mo. [email protected]

 

[T-Mo]

122 for sale. Runs great, mows good. The left rear tire has a slow leak. Right now she's a little dirty from mowing my daughter's back yard. Reason for selling is I'm running out of room. $350 located in Bonne Terre, Mo. [email protected]

 

[mstetar]

just in time for winter!
1. CW-36 snow thrower needs some tlc, but very usable good gearbox, prob only needs paint and a new chain to be used as this one is rusted solid. $200 OBO

next is a BB-36 snowthrower for an original! looks rough but it actually in great shape! no dings or cracks in the augur, has a good wear edge and skid shoes ready to work with some paint! $300 OBO

would be willing to wheel and deal for a WF snow blade!
lots of other parts from originals to quietlines!email for needs!

 

[rdehli]

For Sale nice narrow frame hyd lift ... repainted... new hoses ...new belt asking 365.00 shipped to your door obo . Would make a great Christmas gift for the cubber in your family

 

[rdehli]

Hope this is the right place to post this... here goes ... looking for some one who is traveling from northern Wisconsin... Minnesota or northern Iowa to the Kansas city... Columbia... or Jefferson City Missouri area looking to get something small a ride ... thank you

 

[hydroharry]

Hey Guys - got a few excess items available. Can send pics if you ask. (Will try to get some tonite if I can borrow a camera)

Head and Tail Light Switch (original IH stamped) for Original, 70/100 - 71/102/122/123 - 72/104/124/125 and 73 but not sure about the 106/126/127/147. All cleaned up and ready for paint or use as is (unless I paint it tonite). Saw one sell for $50+ on ePain. Get yours here for $45 shipped to your door (lower 48 US only, don't know about exporting to our northern neighbors).

Battery hold down bracket for narrow frames, with the J bolts (IH stamped) and original wing nuts. Needs cleaning and paint but overall pretty decent. $15 shipped to your door.

(I am looking for an original wide frame snow blade lift rod, roughly 28" or 28 and 1/2", or if you have a made up one that has nice sharp/square right angle bends, I might work a trade. Also need a xx8/9 or QL wide frame battery hold down bracket with the J bolt and wing nut).

Hydro Harry - e-mail in profile

 

[T-Mo]

Rob,
You do realize that Coumbia and Jefferson City is pretty far from Kansas City?

 

[digger]

Terry R.
125 miles ain't far these days, LOL
If ya take 50 from Jeff city west to KC rather than Columbia, you can cut off 22 miles. But you add 45 minutes.

Just watch out for Greg Overfelt of the MHP, he'll nail yer butt, LOL

 

[rdehli]

Just looking to this item close to its final destination... within an hour or 2 is perfectly fine it does not have to arrive at this guys place and put in the shed by no means

 

[lpalma]

I have a CW 36 for sale.No lift or chute rod.It spins freely and has a new set of runners.
$100.00 or B.O
Pickup in Montague N.J.