-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Archive through November 16, 2010
- Thread starter lbury
- Start date
Help Support IH Cub Cadet Tractor Forum:
lpalma
Well-known member
Complete light set for a 71,102,122,123 cubs.
The panel is not bent and all the mounting studs are in good shape
It comes with new correct GE bulbs.
A new Grote lens is included. The only flaw is the switch to tailight wire has a cut in it.
No dents in the tail light,and has the original red primer inside.All wiring is included to make this a turn key set up.
Last one sold on the auction site for $235.00.
$185.00 plus shipping from Montague N.J.
The panel is not bent and all the mounting studs are in good shape
It comes with new correct GE bulbs.
A new Grote lens is included. The only flaw is the switch to tailight wire has a cut in it.
No dents in the tail light,and has the original red primer inside.All wiring is included to make this a turn key set up.
Last one sold on the auction site for $235.00.
$185.00 plus shipping from Montague N.J.
jbaker
Well-known member
- Joined
- Nov 10, 2008
- Messages
- 4,144
- displayname
- jeff l baker
parts tractor your choice 108 or 128 both mostly complete minus engine, seat, volt reg. it will come with a hood but is broken at the nose cone
108 is brake style pto lever...$108.00
128 is button style pto lever also has rear lights minus the lenses...$128.00
108 is brake style pto lever...$108.00
128 is button style pto lever also has rear lights minus the lenses...$128.00
dpetroline
Member
- Joined
- Oct 14, 2010
- Messages
- 7
- displayname
- dustinpetroline
sold 582! thanks dustin
T-Mo
Well-known member
- Joined
- Jan 22, 2009
- Messages
- 428
- displayname
- Terry Reed
123 roller for sale - was repainted a few years back - still looks great. Will have different tires and rims on it than pictures shown. $100 obo
Your choice of either a 42 inch or 48 inch pin on deck for the 1x2/1x3 series. Both good shape. $75 for each
10 hp fuel tank, clean. $25 plus shipping
107 frame with transmission: $50 obo
Also many more parts, including hood, grille, for the 107.
All located in Bonne Terre, Mo. [email protected]
Your choice of either a 42 inch or 48 inch pin on deck for the 1x2/1x3 series. Both good shape. $75 for each
10 hp fuel tank, clean. $25 plus shipping
107 frame with transmission: $50 obo
Also many more parts, including hood, grille, for the 107.
All located in Bonne Terre, Mo. [email protected]
T-Mo
Well-known member
- Joined
- Jan 22, 2009
- Messages
- 428
- displayname
- Terry Reed
122 for sale. Runs great, mows good. The left rear tire has a slow leak. Right now she's a little dirty from mowing my daughter's back yard. Reason for selling is I'm running out of room. $350 located in Bonne Terre, Mo. [email protected]
mstetar
Well-known member
- Joined
- Jun 26, 2008
- Messages
- 510
- displayname
- Matt (Diesel Creek)
just in time for winter!
1. CW-36 snow thrower needs some tlc, but very usable good gearbox, prob only needs paint and a new chain to be used as this one is rusted solid. $200 OBO
next is a BB-36 snowthrower for an original! looks rough but it actually in great shape! no dings or cracks in the augur, has a good wear edge and skid shoes ready to work with some paint! $300 OBO
would be willing to wheel and deal for a WF snow blade!
lots of other parts from originals to quietlines!email for needs!
1. CW-36 snow thrower needs some tlc, but very usable good gearbox, prob only needs paint and a new chain to be used as this one is rusted solid. $200 OBO
next is a BB-36 snowthrower for an original! looks rough but it actually in great shape! no dings or cracks in the augur, has a good wear edge and skid shoes ready to work with some paint! $300 OBO
would be willing to wheel and deal for a WF snow blade!
lots of other parts from originals to quietlines!email for needs!
Hope this is the right place to post this... here goes ... looking for some one who is traveling from northern Wisconsin... Minnesota or northern Iowa to the Kansas city... Columbia... or Jefferson City Missouri area looking to get something small a ride ... thank you
hydroharry
Well-known member
- Joined
- Jul 22, 2007
- Messages
- 4,377
- displayname
- Harry Bursell
Hey Guys - got a few excess items available. Can send pics if you ask. (Will try to get some tonite if I can borrow a camera)
Head and Tail Light Switch (original IH stamped) for Original, 70/100 - 71/102/122/123 - 72/104/124/125 and 73 but not sure about the 106/126/127/147. All cleaned up and ready for paint or use as is (unless I paint it tonite). Saw one sell for $50+ on ePain. Get yours here for $45 shipped to your door (lower 48 US only, don't know about exporting to our northern neighbors).
Battery hold down bracket for narrow frames, with the J bolts (IH stamped) and original wing nuts. Needs cleaning and paint but overall pretty decent. $15 shipped to your door.
(I am looking for an original wide frame snow blade lift rod, roughly 28" or 28 and 1/2", or if you have a made up one that has nice sharp/square right angle bends, I might work a trade. Also need a xx8/9 or QL wide frame battery hold down bracket with the J bolt and wing nut).
Hydro Harry - e-mail in profile
Head and Tail Light Switch (original IH stamped) for Original, 70/100 - 71/102/122/123 - 72/104/124/125 and 73 but not sure about the 106/126/127/147. All cleaned up and ready for paint or use as is (unless I paint it tonite). Saw one sell for $50+ on ePain. Get yours here for $45 shipped to your door (lower 48 US only, don't know about exporting to our northern neighbors).
Battery hold down bracket for narrow frames, with the J bolts (IH stamped) and original wing nuts. Needs cleaning and paint but overall pretty decent. $15 shipped to your door.
(I am looking for an original wide frame snow blade lift rod, roughly 28" or 28 and 1/2", or if you have a made up one that has nice sharp/square right angle bends, I might work a trade. Also need a xx8/9 or QL wide frame battery hold down bracket with the J bolt and wing nut).
Hydro Harry - e-mail in profile
Terry R.
125 miles ain't far these days, LOL
If ya take 50 from Jeff city west to KC rather than Columbia, you can cut off 22 miles. But you add 45 minutes.
Just watch out for Greg Overfelt of the MHP, he'll nail yer butt, LOL
125 miles ain't far these days, LOL
If ya take 50 from Jeff city west to KC rather than Columbia, you can cut off 22 miles. But you add 45 minutes.
Just watch out for Greg Overfelt of the MHP, he'll nail yer butt, LOL
lpalma
Well-known member
I have a CW 36 for sale.No lift or chute rod.It spins freely and has a new set of runners.
$100.00 or B.O
Pickup in Montague N.J.
$100.00 or B.O
Pickup in Montague N.J.
