I read that FAQ, but it just says 100 kb maximum size. I have a picture that is 936kb, and am trying to shrink down to get on here. Quality gets fuzzy when I get it down to about 185kb. I'll do some checking on my camera.
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Archive through June 05, 2013
- Thread starter rrschmitt
- Start date
Help Support IH Cub Cadet Tractor Forum:
Send it to me and I'll fix it for ya.
kide
Well-known member
- Joined
- Aug 27, 2006
- Messages
- 3,779
- displayname
- Gerry Ide
Charlie - we gonna get a pic of a 169 posted back on the main forum ??
John - not sure what you are using to resize, I usually use the Image Resizer found on the Codeplex website (Http://imageresizer.codeplex.com/) because it's very simple to use.. Note that along with size in bytes, you need to watch the 800 pixel width limit, which is how I end up usually scaling my pics....
John - not sure what you are using to resize, I usually use the Image Resizer found on the Codeplex website (Http://imageresizer.codeplex.com/) because it's very simple to use.. Note that along with size in bytes, you need to watch the 800 pixel width limit, which is how I end up usually scaling my pics....
Here's one for ya, since we don't see'um very much on here any more!
jbaker
Well-known member
- Joined
- Nov 10, 2008
- Messages
- 4,144
- displayname
- jeff l baker
Charlie with that 169 photo I MUST ask if you sent [email protected]=- your 169 info
On a 122 are the frame bushings for the front axle pin pressed into the frame?
Nope, just checkin to make sure everyone knew what a 169 looked like since they are no longer posted on the main forum board.
Doug A.
You can bang'um out with a hammer and punch with no problem.
You can bang'um out with a hammer and punch with no problem.
Charlie - the collar that protrudes from the front axle that the pin rides on a replaceable item? I've seen info on boring it out and inserting a bushing but not a new collar. Most I've encountered have been welded to the axle cross member to one degree or another - is that done because they work themselves out? Thanks
