Archive through July 30, 2012

[bjames]

The preview worked but the pics did not show up so I made them even smaller.

62 Original recoil start
Needs alot of attention but is pretty much all there. Has the original K161-T engine that starts right up and runs good. Trans is good. Includes another correct rewind starter complete with mounting flange, and a complete spring trip snowblade. $500.00 Firm. Located in Central Indiana.

 

[rneaveill]

4 rear rim with tires on them tires are junk, also have a few front rims with tires on them some wide some skinny they need to go trying to clean up the farm please make an offer must be pick up in springfield ohio thanks roger

five dollors a peace for the rear rims and 3 dollors for the front rims ill get a count on how many front rims i have

 

[jreid]

I've got a cub cadet 149. Its in great condition. I have a mower deck for it and a blade. The mower deck is all original but has hardly ever been used and is in great shape. The only thing wrong with the cub is the steering is loose bt an easy fix just dont have time. The seat is also in bad shape but is also a quick fix. I've got chains for it and the manuals. I love this tractor bt i dont use it enough. I'm dropping the price from 1,100 to <font size="+2">900</font> or I would like to trade for a jet ski or a snowmobile. Please make me an offer the worst I can say is no. I've put alot of new parts on it over the last year. Thanks

 

[bproctor]

The 123 that I posted on the 29th has been sold!

 

[retrombley]

Cub cadet windbreaker/snowshield for narrow frame Cub. I got it in a bunche parts for a snowblower that I purchased many years back. I was going to restore it, but just don't have the time and the Cub is gone. I would rather some one get the chance to use it. I have acquired some plastic/vynvl covering (not CC labeled) that can be used for the restoration.
$50.

Charlie was here.

Charlie was here.
I live in Rochester, N.Y. Don't want to ship it.

 

[thoffman]

 

[thoffman]

Since the Solid mount/Ico mount debate has been burning on the main page, the Engine Mount Kit I posted on July 20th have been reduced.

Spankin' new Motor mount kit w/instructions for Quiet lines. $25.00 at my CC dealer <strike>$20.00</strike> $15.00 each or <strike>$75.00</strike> $55.00 for all four + shipping.

Complete creeper gear and clutch set up for wide frame. (Came off a 1200) Everything from the 3 pin drive plate to the creeper gear unit. Use you old drive shaft coupler. $175. + shipping Email for pix of set up.

 

[sshaff]

For Sale:

Transaxle for Cub Cadet 70 (missing first/reverse shifter fork)-- $75;

Painted hoods for 72 and 123 -- $75 for one or $125 for both;

Set of 123 fenders -- $40

These items for pick up only.

 

[cwestfall]

selling 5 rear engine riders most ran when parked but probably need work done to them fiberglass is good and not cracked some decks also to go 500.00 for the bunch.

 

[cwestfall]

super cub cadet good parts power steering,dual brakes, good tires and rims 500.00 if no takers will be parted out,

 

[cwestfall]

cub cadet super tie rods-20.00 splined coupler-60.00 tail lights-20.00,ih emblem-20.00

 

[dreinhardt]

I'm still cleaning out the garage for the move.I have another bundle (lot) to offer for sale . The decal are left overs from a 149 kit (all like new),the dash tin is form a 108/128 (has been repainted),part of a pto rod (149),seat hinge brackets (149),voltage regulator (129 ? ),coil brckets,starter bracket, Flywheel shroud (149).
All for $10.00 plus shipping.Email [email protected] or call 812,637,6205. parts located in west harrison in .

 

[dschwandt]

Tom H. Check your e-mail
I'll tgake the ISO mounts off your hands

Dave Schwandt

 

[dreinhardt]

The garage lot is sold pending payment and shipping.
Thanks Dave

 

[drohacek]

cleaning house. 109 complete but not running. $200.00

540-760-3552 Spotsylvania, VA

 

[drohacek]

Still cleaning house. Technically this probably should be for sale in off topic. But since it is a roller and could be built into a 782 I'll try to post it here with your indulgence.
1711 Roller Would make a nice one to repower with a V-twin $350.00 Bring a trailer I have more )
540-760-3552 Spotsylvania, VA

 

[drohacek]

Another roller that could be used for a tractor puller frame if your looking for an 82 series puller Asking $200.00 I have all the sheet metal that goes with it. Not pictured but I have front wheels too.

Located in Spotsylvania, VA Bring trailer buy a few cubs 540-760-3552

 

[drohacek]

I have some misc parts like grills, 3point hitch for wide frame, extra 82 series sheet metal.
Trying to lighten the cub load here. Bring a trailer take some stuff!
540-760-3552

 

[rmcshane]

For sale: Cub Cadet 169 tractor. Tractor is currently tore down to the frame and has the following parts:

Frame, has the correct serial number.
Dash tower-Still has steering parts
Ported hydro that worked when removed
front axle
hood and grill
4 tires, front wheels are in good shape.

There is no engine, fenders or any 169 specific parts included. I will not part out anything-buy one peice, you get the rest of the tractor too. Price is set at $275. Serious inquiries only. Here's your chance to rebuild a rare model cub. Can send pics by picture messaging. Located in Springville IA. Please call 319-929-0902 or email at [email protected]. Thanks.

 

[thoffman]

Thinning out some of my duplicate Cub Cadet and IH brochures. Cadet Riding Mowers and Cub Cadet "Special Duty Equipment" $7.50 shipped to your door. Will combine shipping. Check out the other IH stuff on the OT classified.