• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

xtreme motor works
cub cadet used parts
cc specialties
kirk engines
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Wanted To Buy

    I'm looking for a set of side panels for a 1250.
  2. H

    Wanted To Buy

    Need a sub-frame and mule drive for my 1250 so I can use the 44 deck. I am in the North Texas area.
  3. H

    Archive through June 01, 2016

    Harry: my sub frame the has the straight outer frame, not the curved and it did come from a 38" deck. Don't think the pulley mounts are bent, as they look aligned straight back. I won't be able to get any pics for a couple of days, as pulled back muscles trying to get it mounted over the...
  4. H

    Archive through May 31, 2016

    Jesse: had some internet problems with storms here in Texas reason I did not respond yesterday. Appreciate the response, but still need a little more info on what all I would need to adapt the 44" deck to my 1250. Any idea where I might find parts? It looks like I would also need some way to...
  5. H

    Archive through May 31, 2016

    I have been looking at 44" mower deck and would like to use it on my 1250, but the center pulley is offset and will not allow mounting. Is there a modification kit available for this. Also, what is the difference between a 44 and 44A Deck? Thanks in advance for any information provided
  6. H

    Archive through July 08, 2015

    Jim, Trying to send photos, but not having much luck. could send to your email if you would like. holden
  7. H

    Archive through July 08, 2015

    Jim, not exactly sure which deck I have, as it might have had some work done to it. It is a 38", and only ID it has is the S/N which is 0320016U101340. Sure would like to know for sure which model. I do have the list of manuals for the CC1250. but it shows 3 different models of mower decks, and...
  8. H

    Archive through July 08, 2015

    Kraig and Jim, Thanks for the responses. Kraig is right, it is the blade shroud I am looking for. The one or some of it is completely deteriorated, so need a bit of stability on it. Will see what I can find to make one out of.
  9. H

    Archive through July 07, 2015

    Where can I find a shroud for a 38" mower deck, or do I need to fabricate one. Trying to rebuild the deck, and the first thing I would need would be a shroud.
  10. H

    Archive through June 24, 2015

    Kraig, Looks more like the top one, but has no gauge wheels or deflector. No decals, only a plate with the number stamped in. Sorry, didn't respond sooner, but still busy getting the 1250 up and running. Actually it seems to measure to 38". Holden
  11. H

    Archive through June 24, 2015

    Need help identifying a mower deck. It came with a 1250 and the only Id on it is 0320016U101340. I want to restore it, but will be needing some parts, and a model number sure would help. Thanks
  12. H

    Archive through June 20, 2015

    Found the rim that I needed. Thanks Charlie for your response! Holden
  13. H

    Archive through June 13, 2015

    Charlie,,, Thanks, still no other reply, so would sure appreciate your offer. Holden
  14. H

    Archive through May 01, 2015

    I am needing a rim, size 23x10,.5 to continue a rescue restoration of a CC 1250.
  15. H

    Archive through June 09, 2015

    David, I picked up a small pry bar and just used a little pressure between frame and engine, and twisted the cover off the points. The push rod needs replaced, so will order new parts from CC specialty and get it perfected like a CC should be. It started right up and sounds pretty good. No...
  16. H

    Archive through June 09, 2015

    Charlie, Nic and David, Thanks for the info. I had found the hole, but there is not enough room between engine and frame to remove the cover. Will probably have to move the engine to make room. Holden
  17. H

    Archive through June 09, 2015

    Thanks for the responses. Looks like I have to loosen the engine to get the cover off the points. That S/N for the 1250 is fully 206063U168233. I Went to Tractor Supply for the parts, but the clerk didn't seem to interested in looking for the part, as I did give him the Tractor Number, but he...
  18. H

    Archive through June 06, 2015

    Recently purchased a 1250 S/N 613448 with a 38" deck. Needs quite a bit of work, but think the $100 was worth it. Engine S/N Tag attached is 8168233. Looks like a 1977 Kohler, but the decal with model number etc is not on the frame. How can I find the model Number, as the parts place won't...
  19. H

    Archive through May 01, 2015

    Looking for a older CC for mowing, and possible later a bucket and blade. I am in the North Central Texas area. Holden
  20. H

    Archive through April 27, 2015

    Thanks Clark, will try to find out the series # to see what it is. Unit looks rough, but he wants $600 for the 108, so I might try to bargain a little. Holden
Back
Top