Hydrostat in 1811 stopped pulling

[jdtaylor]

The hydrostat in my 1811 has stopped pulling. No leaks at either valve in top of transmission and spiral pin is in place. Using Hytran fluid. Any thoughts on what the problem could be?

 

[mgonitzke]

There are three spiral pins in the driveshaft. Are all three intact? Does the hydraulic lift still work? When is the last time the fluid and filter were changed?

 

[lpalma]

Maybe the linkage fell off on the cam plate or off the go-go handle connection.

 

[dschwandt]

Just because the spirol pins are in place does not mean they are not broken

 

[dschwandt]

Best to check and make sure what's spinning and what's not spinning