cubs4lifeofme
Well-known member
WITH NO CLUTCH WHAT WOULD THIS COMMAND 18 HP COME OFF ?
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
CH18S. Kohler ?
- Thread starter cubs4lifeofme
- Start date
Help Support IH Cub Cadet Tractor Forum:
mgonitzke
Well-known member
Who knows. Looks like a cub spec one that someone removed the clutch from and installed a pulley. It has the CC style driveshaft adapter on the flywheel end.
1811Cub
Well-known member
Kohler Spec number 62599 originally came on a Cub 3184 and 3186 tractors. They had the vacuum PTO originally, hence why that is long gone.
cubs4lifeofme
Well-known member
If i can get it running is it something that could be used on my 2084 cub with command or 1862 with junk Magnum ?
cubs4lifeofme
Well-known member
Drive shaft flange bolts up. Off 2 a good start lol.
cubs4lifeofme
Well-known member
To the 2084 that Is. Gotta find the motor plate. Ugh
mgonitzke
Well-known member
2084 had a Command...it will bolt right in. 1862 would need driveshaft, muffler, etc from any of the other cyclops tractors that originally had a Command.
cubs4lifeofme
Well-known member
Bummer the 2084 turned out to be a 2082 that had a magnum.
You will need to drill 4 bolt holes larger and tap them on pto end of motor to mount an electric pto as they are not threaded on that motor. The command engine is also shorter in length than the magnum engine. So keep that in mind when figuring a driveshaft.
Similar threads
