Tractor For Sale CC 128s, attachments, parts and pieces

[Phil Bailey]

I’m selling out of all my CC stuff. I’ll try to list most of it here. I would like to sell this as one big package, so hitch up yer trailer and head to East Tennessee 37325.
I have two 128s. both are good running fully functional ready for work without hardly any tinkering.
1st one (pic 1,2,3) has been re powered with a K321 (148?) that has approx 350 hrs. Also has rear lift and briny hitch.
2nd (pic 4,5,6) one has a new K301 that I got from Jim Steele (is he still around?) some y ago,and has less than 50 hrs. Also has Hi/lo trans. and rear lift with spring assist. Currently has a rototiller gearbox mounted.
I also have two 44” and one 50” deck with two wide frame carriages ready to use. both 44” decks are in great condition, no rust and good spindles. The 50 is solid with fair condition spindles

I have a #1 rototiller with one extension. This unit is complete and ready to use including two
Of the loooong belts.
I also have two complete creeper gear assemblies on narrow one wide frame rebuilt and ready to use.
there is also way too much other stuff to list but look at the pictures in the next post and I’ll answer questions. I would like $1800.00 for everything.

 

[Phil Bailey]

I’m selling out of all my CC stuff. I’ll try to list most of it here. I would like to sell this as one big package, so hitch up yer trailer and head to East Tennessee 37325.
I have two 128s. both are good running fully functional ready for work without hardly any tinkering.
1st one (pic 1,2,3) has been re powered with a K321 (148?) that has approx 350 hrs. Also has rear lift and briny hitch.
2nd (pic 4,5,6) one has a new K301 that I got from Jim Steele (is he still around?) some y ago,and has less than 50 hrs. Also has Hi/lo trans. and rear lift with spring assist. Currently has a rototiller gearbox mounted.
I also have two 44” and one 50” deck with two wide frame carriages ready to use. both 44” decks are in great condition, no rust and good spindles. The 50 is solid with fair condition spindles

I have a #1 rototiller with one extension. This unit is complete and ready to use including two
Of the loooong belts.
I also have two complete creeper gear assemblies on narrow one wide frame rebuilt and ready to use.
there is also way too much other stuff to list but look at the pictures in the next post and I’ll answer questions. I would like $1800.00 for everything.

More pictures

 

[Phil Bailey]

More pictures

I also have manuals and instructions etc. i Have the blades for the deck shown without any BTW. There is other misc items that I don’t have pictures of right now, but it all goes.
thanks for looking!!!!

 

[lpalma]

Good deal right there.

 

[mgwin]

What manuals do you have?

 

[Phil Bailey]

The parts manual, Kohler manual, mower deck, etc. original manual for the 128s. I can dig out all of them and see exactly tomorrow.
The first tractor listed, I bought from the original owner in 1987. It mowed the lawn every week till 2018 when I moved. It was re powered in 2001 with a brand new K 321 , probably one of the last of the three digit cub replacement motors. Both have had the oil changed every 10 hours since new.

 

[lpalma]

road trip Marty?

 

[Phil Bailey]

1st tractor also has a newly rebuilt SG. The other one was rebuilt probably 10 years ago, but low hours since. I only used it for rototilling twice a year and pull a trailer once in a while.
also, there is two complete creepers like I said, and also a parts creeper. New old stock dash tin also.

 

[jack casey]

I’m selling out of all my CC stuff. I’ll try to list most of it here. I would like to sell this as one big package, so hitch up yer trailer and head to East Tennessee 37325.
I have two 128s. both are good running fully functional ready for work without hardly any tinkering.
1st one (pic 1,2,3) has been re powered with a K321 (148?) that has approx 350 hrs. Also has rear lift and briny hitch.
2nd (pic 4,5,6) one has a new K301 that I got from Jim Steele (is he still around?) some y ago,and has less than 50 hrs. Also has Hi/lo trans. and rear lift with spring assist. Currently has a rototiller gearbox mounted.
I also have two 44” and one 50” deck with two wide frame carriages ready to use. both 44” decks are in great condition, no rust and good spindles. The 50 is solid with fair condition spindles

I have a #1 rototiller with one extension. This unit is complete and ready to use including two
Of the loooong belts.
I also have two complete creeper gear assemblies on narrow one wide frame rebuilt and ready to use.
there is also way too much other stuff to list but look at the pictures in the next post and I’ll answer questions. I would like $1800.00 for everything.

Phil, I think most guys looking at this already have a tractor so it might not be a bad idea to sell them separately. Both tractors are in A-1 condition and, I think you, like me, are a fusspot and made them this way. In my view they are worth $2000 per. However, I know you want to move the stuff and don't know the market in E Tennessee.
Lotsa luck, Jack

 

[Phil Bailey]

Yeah I get that. I posted on here hoping I’d find that one in a thousand guy who wanted to add to his fleet and stash of stuff.
i cant use these anymore, the property is too big and I lost interest after 36 years of playing with them. It ain’t a fire sale, but it all should go to somebody who could use them.

 

[Ethan Whitaker]

Do you still have them? I’m extremely interested

 

[Phil Bailey]

Do you still have them? I’m extremely interested

Hey yeah, sorry I haven’t been looking at this, but I still have this stuff.

 

[Phil Bailey]

Hey yeah, sorry I haven’t been looking at this, but I still have this stuff.

I guess he wasn’t “extremely“ interested. One post wonder.
anyway, tractors are for sale separately, first one would include a 44” deck for $500, and the second one a 44” deck and the rototiller for $600.
I listed this stuff locally, but no real interest. Nobody wants these old machines anymore. If I have to cart this stuff anywhere it’ll be to the dump. I am so done with it. Come on down and shoot me an offer.

 

[OBH]

If you decide to part things out Im still interested in a creeper assy.

 

[rkuik]

wish you where closer.

 

[Phil Bailey]

wish you where closer.

Yeah it’s be a couple days ride for you. Think of it as a fall foliage road trip

 

[Phil Bailey]

If you decide to part things out Im still interested in a creeper assy.

$150. Plus shipping. They’re kinda heavy for their size.

 

[lpalma]

PM message sent.

 

[Phil Bailey]

PM message sent.

Ok , how to read. It’s. it’s not showing up on my phone here....

 

[lpalma]

You should be on this webpage to view it.