Archive through February 22, 2008

[hsimon]

Brandon- I've replaced the QA pins on my blade with a solid piece of 1/2" HR Rod along with several on the QA snowchuckers that I've owned over the years, best investment in a cub attachment that I made IMHO>

 

[hcole]

Why is it sooooooooooooooooooooooooooo wiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiide in heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeere

 

[phalli]

Thanks for the info. I saw how to adjust the PTO in the book after i asked how to.

 

[bmoore]

Guys, PLEASE hit the "enter"/"return" key between pics so I don't have to go to the next room to read the posts. Right now, the posts are about 2 1/4 screens wide.

 

[digger]

It's not wide anymore.

 

[mhomrighausen]

Dave H. Thank You for posting your pics of the correct shade of green deemed appropriate for this forum. And you have a very nice looking Cub.

Willian B. Congratulations on your recent acquisitions.

Angel just said that according to the paper it is supposed to get to 38* today. Ohmigod.... MORE Global Warming from all these Cub Cadets having to move so dang much snow this winter.

 

[bmoore]

Thanks, Charlie.
William B,
Is that electric lift from a wideframe? My 147 is my favorite tilling tractor.

 

[aaytay]

Rick-
Any flat-base oil pan will work. I think my engine was from a 104/5. You'll just need to drill a new hole through the frame for the oil-drain plug, and it helps to weld a nut on the drain-plug so you can use a ratchet with an extention to drain the oil instead of trying to fit an open end or crescent wrench under that classically narrow frame.

<font size="-2">I can't remember if I had to drill new holes for the engine mount bolts or not...

I think I just knocked the nuts off the back of the old holes.</font>

Hugh-
I'm not a leader, I'm just an instigator.....

 

[dtanner]

hello guys. Jim wants me to make the trip to Bethesda MD 20814 to get his 125 he paid for. i`am thinking of making the trip. he asked me because i`am planning a trip to Maine to Frank C for a bunch of parts that i have bought off epay and other (snow blade). so i have been thinking of makeing the long drive there 828miles from Franks place in Maine.I would not know what to Charge for that trip. later Don T

 

[mheinlein]

Any help in Identifying this part? It is 7 13/16" long
Marlin