New to the Cub world. Bought a heavily used 2185, no idea of year. Has a Kohler 18 Command motor, 48" deck. Motor started every time at sellers house. Got it home and gave it a once over with the hose, bad idea. Now it won't start. I did disconnect the battery and removed it before the bath. I did splash more water then I wanted under the dash. Got the PTO, ignition switches wet. Did not get the carb wet. Has new air cleaner, and battery, 03/16, but I'm guessing that's all the seller did. I hooked the battery back up and it started, ran 30-40 seconds and died, now won't turn over. Noticed the amp light stays on too. I also had removed the seat and undid the seat switch but reconnected it before starting it. Has 12.65 volts on the battery and on the solenoid. It will turn over if I short the 2 points on the solenoid. I'm guessing I did something when it got wet, like ruin the solenoid? I'm at a loss. I don't know much more about electronics or motors. Thanks for any help.