Archive through March 22, 2009

rbeem · Mar 22, 2009

Arrrrrrrrgh...the Bug got me! Here's the pics!!

dmerkle · Mar 22, 2009

This is a new Brinly moldboard plow that has a Craftsman decal on it.

The plow was missing some parts when I bought it. The missing parts were made or replace with new parts from Brinly. The crank and threaded tube are not a Brinly part.

They were made in my shop. I have a 12 inch Brinly plow with the same design.
I can delivered for free to any plow day that I go to or will box it up and ship at your expense.
Pick up at my home is ok. I'm located in Middle Point, Ohio (35 miles west of Lima, Ohio).

Asking $250.
Sears has new moldboard plows on sale. They cost $390.
http://www.sears.com/shc/s/p_10153_1...0070921x00003d

Plow Days I'm planning to go to are:
Monterey Indiana PD-April 5
Kentucky Tractor Club PD-April 11
Meadow View PD-April 18
Ft Allen Plow Day-April 24-25
Climax, Mi Plow Day-April 26

My email address is in my profile

jspicer · Mar 23, 2009

Doing some spring cleaning. I've got a couple extra wide frame sleeve hitches. I have 2 to sell. They are complete except for the bottom U brackets. I'll take $90 each plus actual shipping. Email is [email protected] .Thanks, Josh

rdehli · Mar 23, 2009

Spring cleaning Garage sale Forget about the prices previously listed the current price is make me an offer on all the following parts all offers will be considered ...All offers plus actual ship or free delivery to Rockford Ia in 2 weeks

just remember if you see something here that you can use or need just email me an offer and more that likely will be yours

thnx Rob

cengelking · Mar 23, 2009

6.5x12 open trailer, newer wood, new paint, new wiring, 12 inch side rails on three sides ramps(no gate). Good tires with spare included. This trailer is a great investment for plow day or any thing you want to haul.
Reason for selling, I have three trailers i need to lighten the load. $950.00 or best. May be able to help with delivery???

blively · Mar 23, 2009

1250 Cub, does not have side shields and comes just as you see here. Engine condition unknown but all the pieces are there. 200 OBO. Pick up in Bowling Green, KY. May consider trades for a good 1450 or 1650. Check profile for contact info, thanks for looking

rdwright · Mar 24, 2009

123 cub is in pieces and looking to sell the rear end with hydro for $250.
I will take $150 for the motor(complete).
All other parts still available.
ALL PARTS ARE PLUS SHIPPING!!!
[email protected]
Rick

junderwood · Mar 24, 2009

Time to reduce the fleet a little. I am selling a few things to try and concentrate on other projects. This is the first tractor I restored several years ago. It went to a few plowdays and shows but just sits now since I have moved on to 82 series and green tractors too.

This is a 126 that was stripped to bear frame blasted, primed, painted, and reassembled. The engine runs good and was not touched. It smokes a little at start up now but wasn't when I was using it a PD's. It has new paint, decals, wiring harness, clutch, drive shaft, and tires(rears tubed and washer fluid filled). It will include the weights, rear lift, hydraulic lift, creeper, and a sleeve hitch not pictured. I will be replacing the double lower bracket with a single when I install the hitch. This is a great tractor and the only things I know wrong is the hydraulic lift has a slow leak at the reservoir seal. The lift was rebuilt with new seals and spool spring, and hoses. Creeper had new seals as well. Again, this is a great tractor that is fully out fitted. I am asking $1300. Pick it up in Peoria, IL or I'll deliver to PD in Rockford, IA next month. I would like to see this go to someone who could use it so it doesn't sit like it is now.

rleo · Mar 26, 2009

IH 42" tiller w/ gearbox and both belts. Recently derusted and painted. $300.00

cengelking · Mar 26, 2009

Price drop on my trailer $850.00

hsimon · Mar 26, 2009

Still have a 582 that is looking for a new home. Built in June of 1980. Runs like a top, comes with the 3pt hitch, helper spring and the bracket for the front blade or snowchucker. $750 picked up in Austin, MN or delivered to the IA plow day.

Also have a Snap-On top box model KRA59K and a Snap-On roller cabinet model KRA3800C for $1200 for the pair or will consider spliting the top and bottom. These too can be delivered to plow day or picked up in Austin, MN. If interested please let me know and I will get some pictures of them.

tdrzewiecki · Mar 27, 2009

I have a Cub Cadet 100 with hydraulic lift, 42 inch mower deck, 42 inch spring loaded plow,and rototiller with rear pto. The engine is the original 10hp Kohler and needs a head gasket. The clutch is stuck. The hydraulic lift works fine. It has the incorrect wheels/tires and seat.

Asking $1100 or best offer for the whole package. Will not seperate. Local pick up only. Located in Waterford, WI. Email me at [email protected].
Thanks, Tom

jlee · Mar 28, 2009

Model 127. Fuel float bowl leaks at gasket. Smokes some when started. Mower deck needs center bearing assembly. Located in San Marcos, TX. Asking $300 [email protected]

hsell · Mar 28, 2009

For Sale: 2 Original Cub Cadets one has mower deck 450 and 350 doing some Spring cleaning 724 882-5806

bmechelke · Mar 28, 2009

Cleaning Out the Shed.

Cub Cadet 129
Runs Great, Hydralic Lift, & 3 point. Would either make a good project tractor or you can part it out.

$350

Cub Cadet 124
Runs good, headlights with taillight, creeper, three point with spring assist. This is a solid tractor that you can use now. Comes with mower.

$750

Cub Cadet 125

This is a nice tractor. Completely gone through from the bottom up. Strong runner, tight steering and really nice paint. You can either work it or show it, just needs some decals. Comes with a mower.

$800