• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by cosborne

kirk engines
cc specialties
Advertise with us
xtreme motor works
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Archive through June 07, 2007

    I'm in the process of restoring my 1650 and was wandering how bad do they vibrate normally? Mine tries to shake the fenders off in all RPM ranges except idle and wide open. The motor was rebuilt by the former owner and when I pulled it apart the head gasket was leaking, but other then that it...
  2. C

    Archive through April 17, 2007

    Hi, can anyone tell me if John Deere Hy-Guard will work in my 1650 trans? My Cub Cadet Dealer said he thinks they are both the same specs but since neither one has any info. on the bottle I can't be sure. Any help would be appreciated, Chris.
  3. C

    Archive through August 11, 2004

    Thanks for the float pin dimensions. I fab'd it today out of some flat and round stock. It's not exactly the same as factory - but its doing the job. It baffles me why the dimensions of such a simple factory part are such a closely guarded secret.
  4. C

    Archive through August 11, 2004

    Rich, thanks for postings the picture of the float lock out pin - any chance you could measure the hole centre to pin center and pin legths for me? By the time I order one from the sponsor and have it shipped to Canada and pay the shipping and duty etc it will liely cost me $75; much...
  5. C

    Archive through August 11, 2004

    Two 149 questions ... 1. Anyone ever had the spring-pin in the right lift arm attached to the rockshaft break? I'm having an unpleasant time getting it out - not much room to work down in there. 2. Can anyone post a drawing/photo/sketch of the float lockout pin with dimensions - I need to...
  6. C

    Archive through May 29, 2004

    Nate: Can you still steer with 400+ lbs in that loader?
  7. C

    Archive through May 23, 2004

    Hello all. Questions about using a blade on a 149. What length is the lift bar supposed to be? I have one that's 32.25" and its too long to even get it mounted. If I use the 27" off the snow thrower then I can't get the blade to go low enough. When the float pin is moved to the lock...
  8. C

    Archive through May 21, 2004

    Bud: http://www.bigbud.com/
  9. C

    Archive through May 08, 2004

    Kraig: thanks for the loader pics. What's everyone's opinion on the loaders...am I better to look for one of the these third party loaders and adpater it to my cub (if so which one works best; can they still be found?) or am I better to build my own (say from Nate's plans)?
  10. C

    Archive through May 08, 2004

    Some general questions... 1. a 149 w/ hydr lift - should it have the sleeve hitch on back or was this an option? 2.So IH built these CC's and they were a hit with hobby farms and big yards. They offered front blades, shredders, snow throwers, trailers, etc - why didn't they offer a loader...
  11. C

    Archive through May 03, 2004

    Thanks Travis - now I understand. I half expected Ken to post some animated reptile
  12. C

    Archive through May 03, 2004

    I have the feeling I'm setting myself up with this question, but... What are these "gators" you guys are talking about with respect to the mowers?
  13. C

    Archive through April 24, 2004

    Don, I know what you mean about trying to find cub parts in this area. I'm across the straight in New Westminster, B.C. I spent a whole day running around the valley trying to track down the original dealer in the area - no luck. Just when I told I had hit pay dirt in terms of who now has...
  14. C

    Archive through April 21, 2004

    Anyone able to identify this machine?
  15. C

    Archive through April 12, 2004

    Aaron K. I recently acquired a 129 which wasn't running. The valves were pressed down to load the unit and they never came back up. I used a small wire brush to clean around the valves and the air to blow off any debris. I removed the valves and socked them in Hy-tran. I left a hy-tran...
See more
Back
Top