Archive through September 06, 2007

[jdonovan]

hydro unit. working when removed from tractor. includes everything, but belt. 300 plus shipping

 

[bcook]

FOR SALE:

Complete Wide Frame spring assist.....all the guys with manual lift tractors need one of these! Makes life easier on you when lifting blades, plows, tillers...heck, even your mower deck!

$60 plus shipping.

Please e-mail me at: [email protected]

Thanks!
Bill

 

[sspencer]

2 hydro rear ends, one with hydro came from narrow frame, one without hydro came from a 149.
$35 each picked up.

 

[sspencer]

The 2 IH hydro rear ends have been sold. Thanks

 

[rdehli]

More shed cleaning ... Winter is comming
good qa 42 blower for narrow frames with lift rod and spout control... also long spout $ 100.00 obo picked up or can deliver to Mn plow day on the 22nd.

Also older mtd walk behind works great and runs good starts on the first pull ... just don't use anymore...$50.00 obo picked up or delivered to Mn plow day...

 

[digger]

125 Hydro with Hydraulic lift, 3 point, deck w/tight spindles/mule drive/belt, rear homemade heavy duty scraper blade.
New points, condenser, coil, muffler, new battery.
$500.00 pickup up in Spring Valley,Minnesota or possible delivery to PD14 in Montrose the 22nd of this month.
CLICK HERE to see and hear it running.

 

[digger]

Super nice Cozy Cab.
It came off a Quietline but will fit just about any Cub Cadet, especially the wide frames.
$350.00 picked up up in Spring Valley,Minnesota or possible delivery to PD14 in Montrose the 22nd of this month.

 

[rdehli]

For Sale clean 123 roller { broken rod} I have pulled the motor { made july of 67} could be an easy restore as it is very straight. $ 150.00 obo picked up in NE Iowa or make arrangements... also have a great running 12 hp that could be tossed in for a few $$$

also have headlights 3 pt and hyd lift for this one too...

 

[lbuttke]

NEW, still in box Cat.0 Brinly cultivator.
$200 possable delivery to plow event next weekend.

The duct tape is only to keep box from falling apart any futher and keep unwanted critters out.

 

[bcook]

<u>PRICE DROP</u>

For Sale: IH Cub Cadet model 1250 SN 658006 (built in June of 1979)
12hp Kohler K301AQS engine, hydrostatic transmission, manual implement lift. 1" front spindles/wheels.

Tractor runs great! No smoke, no noises. Steering is tight. New ISO mounts installed and ISO rail mod. flex couplings, new head gasket, head/piston/valves decarboned, and carb rebuild, done in April of '06. New hydro fan, lip seal, hydro filter and Hytran installed in April of '07. Has a muffler crutch. The fenders are straight. The 10.5" Goodyear turfs on the back are in nice shape, the turfs on the front aren't the best...

The 44A deck is pretty solid. It has had some patching done to it, but unless you flip the deck over, you can't see it.

Tractor is missing nothing, and needs nothing. Take it home, unload it, and mow your yard!! This is the first Cub Cadet I ever bought, and has been my mowing tractor/utility tractor for 5 years.

$600 You won't be disappointed!

Please e-mail me at [email protected] if you are interested.

Thanks!
Bill

 

[bcook]

For Sale:

Complete set of Cub Cadet 'Original' fenders...
Pretty decent shape, center pan needs a little work at the slot for the 3 point arm, reflectors are cracked/broken out.

$200


NEAR PERFECT Original, 70, 100, 71, 72, or 73 Pan Seat
You will be hard pressed to find a nicer seat!! This one looks to have never been cracked!! Comes with the IH carriage bolt

$100


Fender reflectors.
These were used on Originals, 70, 100, 71, 72, 73 (with the fender option) 102, 122, 123, 104, 105, 124, 125 tractors
They have the 'standard' hairline crack in the center...otherwise they are in nice shape.

$10

Tie rod/drag link ends...set of 4 (will do 1 complete tractor)
New in the packages...these fit all Cub Cadet garden tractors from the Original through the 82 series....

a CC dealer wants over $9 per end for them..half price from me though.
$18

Wheel Weights
These are IDENTICAL (size, weight, shape, bolt pattern, etc!) to IH weights..but I can't find a IH emblem cast into them...

$80

Prices do not include shipping.........

Please e-mail me at [email protected] if you are interested

Thanks!
Bill

 

[cwestfall]

for sale rare brinly spreader with book, good shape 200.00 picked up in ohio, also brinly draw bar hitch 50.00 plus shipping e-mail [email protected]

 

[cwestfall]

for sale original kohler 4-6-7-h.p. air cleaners 4-total 6.00 each,n.o.s.kohler recoil start cup n.l.a.40.00,1-very nice used hydro release lever 20.00,10.00 shipping e-mail [email protected]

 

[bcook]

The pan seat and reflectors are tentatively sold.

Thanks!

 

[bcook]

I had bought some gaskets for the Originals I had (when I thought I was going to restore them), now the gaskets are just sitting in the garage, and need to find new homes. They are all still new in the packages!

FOR SALE:

1) Kohler PN 210223 Gasket (goes between the block and the carb on 7hp K-161 engines) new price is $2.02

My price......$1.75

1) Kohler PN 230071 Gasket (goes between the engine block and the bearing plate) According to a online parts look up site, these are now NLA! Their price was $4.12

My price......$3.75 That includes 3 bearing plate shims to set proper crank clearances!

IH-351546 Shifter plate Gasket (goes between the shifter plate and the transmission of any gear drive IH Cub Cadet) new price is $3.87

My price.........$3.25
I have 2 of them.

IH-376216-R1 Reduction housing Gasket (goes between the reduction housing and the transaxle housing on Original Cub Cadets) new price is $8.02

My price.......$7.50
I have 2 of these also.

Prices do not include shipping....

Please e-mail me at [email protected] if you are interested.

Thanks!
Bill

 

[lbuttke]

<font size="+1">PRICE REDUCED ON 129</font>
Old price was $450

It dont look this pretty any more.
New REDUCDE PRICE
<font size="+2">FREE</font>come and get it be for I strip any more parts off it. Both motors seen here goes with it

Along with as many of these parts in this pile you want,

<font size="+2">NO I WONT SHIP, YOU MUST PICK UP</font>
LOCATED JUST A SHORT DISTANCE OFF THE BEATEN PATH TO THIS FALLS PLOWDAY OVER IN MN.

 

[dgoodrich]

Rob Dehli,

I have a Cub 100 and could certainly use the QA42, last two winters both took two days for us to dig out our 400 feet to the road. Where are you located? I am in Indiana. The price is right, need to figure out if I can get to you.

Thanks,

DAve

 

[lbuttke]

To all those who sent emails regarding the 129 and other item.
My Yahoo is acting up and not sending e-mails at this time, I will answer them in the order I recive them when Yahoo gets back up and running.
Sorry for any delays in responding.

 

[lbuttke]

I will be adding more to the parts pile in the next few days as I gather up all the parts laying around here and there around the place.

 

[kweaver]

Dave - Click on Rob's name to go to his profile and you'll have all the info about him you need