Archive through December 29, 2015

[lpierce]

looking for a cub original in the michigan area for a winter project,thanks

 

[mhomrighausen]

Howdy .

and I are in need of a good center grill brace/IH emblem bracket piece for an Original. Also a good used shifter knob for an Original. Shipping would be to 309 Collins Street Colo, Iowa. We both say "Thank You" for your help in finding these two parts. We have a good grill and just need the holder and screw if you should have them.

Off to work so BE SAFE and have a wonderful day.

 

[kmcconaughey]

Marlin, if you don't get a response to your wanted add, Ron Thomley and I posted photos of them with a tape measure for dimensions and it'd be really to make one out of bar stock. Here's a link to the photos.

Original Grill Brace Dimensions

 

[jboelens]

Marlin I have a couple of those braces and will be going to Ames for CaseIH training Jan31 thru Feb 4th - I can easily bring one along if youd like me to

 

[mhomrighausen]

Found the parts. A HUGE THANK YOU FOR ALL THE EMAILS.

Kraig M. I'm going to keep those dimensions for future reference. Hopefully in two weekends I can get the Original here and go over it and get it to its new owner.

John B. Will you have time to stop by? I can also arrange for you to tour the plant and see the Hydro Original prototype.

 

[dkean]

I am looking for a Viking roller/seeder attachment. Please call 309-221-6734 or email at [email protected]

Thanks,

Doug

 

[bbarkela]

I am looking to buy a original 3 pint to fit a 1966 102 top arm full assembly would be nice. If you have on please email me at
[email protected]
Thanks

 

[digger]

You mean something like this?

 

[rciminieri]

I am in the market for a 1450 or 1650, and the dual hydraulic kit for it. I am on Long Island. I can travel a bit or I am open to shipping if it all adds up. [email protected] or 6312950604 call or text. Thanks all.

 

[sblunier]

If you just want a Cub with dual hyd, you may also want to look and 782 and 982, they are much more common with dual hyd.

 

[rciminieri]

I would definitly be interested in a 782 as well.

 

[rcahoy]

Looking for the Implement Lift Knob (#720-3005)and Lift Adjuster (#702-0189) to fit a Cub Cadet 982.

This part is compatible with the following machines:
•Cub Cadet 1050 (149-605-100) - Cub Cadet Garden Tractor (SN: 756300 - 799999) - Implement Lift Handle
•Cub Cadet 1204 (148-610-100, 147-610-100) - Cub Cadet Garden Tractor (SN: 756300 - 799999) - Implement Lift Handle
•Cub Cadet 1210 - Cub Cadet Garden Tractor (NS: 756299 & Prior) - Implement Lift Handle-N 716388
•Cub Cadet 1210 (149-620-100, 147-620-100, 148-620-100) - Cub Cadet Garden Tractor (SN: 756300 - 799999) - Implement Lift Handle
•Cub Cadet 1282 (2050587U, 2050603U) - Cub Cadet Garden Tractor - Implement Lift Handle-N 716388
•Cub Cadet 1211 (148-630-100, 149-630-100, 147-630-100) - Cub Cadet Garden Tractor (SN: 756300 - 799999) - Implement Lift
•Cub Cadet 1340 (141-631-100, 140-631-100) - Cub Cadet Garden Tractor - Implement Lift Handle
•Cub Cadet 482 (142-482-100, 142-482-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1604 (142-580-100, 142-582-100, 142-582-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1282 (142-680-100, 142-680-399) - Cub Cadet Garden Tractor - Implement Lift Handle-N 716388
•Cub Cadet 1710 (142-682-100, 142-682-399) - Cub Cadet Garden Tractor - Implement Lift Handle-S/N 716388 & Up
•Cub Cadet 1712 (142-782-100, 142-784-100, 142-784-399) - Cub Cadet Garden Tractor - Implement Lift-SN 716388 & Up
•Cub Cadet 982 (142-982-100, 142-982-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 984 (142-984-100, 142-984-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 986 (142-986-100, 142-986-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 482 (143-482-100, 143-482-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1604 (143-580-100, 143-582-100, 143-582-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1282 (143-680-100, 143-680-399) - Cub Cadet Garden Tractor - Implement Lift Handle-N 716388
•Cub Cadet 1710 (143-682-100, 143-682-399) - Cub Cadet Garden Tractor - Implement Lift Handle-S/N 716388 & Up
•Cub Cadet 1712 (143-782-100, 143-784-100, 143-784-399) - Cub Cadet Garden Tractor - Implement Lift-SN 716388 & Up
•Cub Cadet 982 (143-982-100, 143-982-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 984 (143-984-100, 143-984-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 986 (143-986-100, 143-986-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 482 (144-482-100, 144-482-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1604 (144-580-100, 144-582-100, 144-582-399) - Cub Cadet Garden Tractor - Implement Lift Handle-SN 716388 & Up
•Cub Cadet 1282 (144-680-100, 144-680-399) - Cub Cadet Garden Tractor - Implement Lift Handle-N 716388
•Cub Cadet 1710 (144-682-100, 144-682-399) - Cub Cadet Garden Tractor - Implement Lift Handle-S/N 716388 & Up
•Cub Cadet 1712 (144-782-100, 144-784-100) - Cub Cadet Garden Tractor - Implement Lift-SN 716388 & Up
•Cub Cadet 982 (144-982-100, 144-982-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below
•Cub Cadet 984 (144-984-100, 144-984-399) - Cub Cadet Garden Tractor - Implement Lift-SN 713151 & Below

 

[psullivan]

Looking for dual hydraulic kit for 1450.

 

[bbarkela]

Yea Charlie that's it

 

[avalle]

I'm looking at spindle parts available . I'm thinking of hunting down seal caps to fit along with bushings so I can drill out for a grease fitting .anyone know of there is already a kit to do so ?. If jot I'll post what I find when I get it all together

 

[mgonitzke]

Al-

Spindles for what? Mower deck? Front axle? What model tractor or deck? Any model IH Cub Cadet garden tractor already has grease fittings in both of those locations.

 

[avalle]

Thanks Doug that manual will be alot of help .Matt? Front spindles ,If kine had grease fittings they must have broken off lol I'll clean them up and take a look .as far as parts all I see is a bushing aND bolt.I was thinking more on the lines of upper/lower bearing w/seals or maybe even a sealed set .I'm enjoying this lil yellow monster .lol just not very familiar with it yet . I've had it a year just moving trailers around with it,pulling downed trees etc. Now like I said earlier it needs TLC.lol

 

[bbarkela]

I am looking to buy just the top arm of a sleeve hitch manual lift for a 102. During the day 6am-6pm text 6414250552 after 6pm you can call me and let me know who you are and what you got. ALL I WANT IS THE TOP ARM NOTHING ELSE. You also may email me at [email protected]
[email protected]
Thanks

 

[digger]

Brady,
The original message was received at Wed, 27 Jan 2016 13:40:09 -0600
from:
<[email protected]>

----- The following addresses had permanent fatal errors -----
<[email protected]>
(reason: 550 5.7.1 Message rejected as spam by Content Filtering.)

----- Transcript of session follows -----
... while talking to westforkschool.org.:
>>> DATA
<<< 550 5.7.1 Message rejected as spam by Content Filtering.
550 5.7.1 Message rejected as spam by Content Filtering.

 

[apsmith]

I'm looking for parts or attachments for a 149 in the Denver Metro area. Would like to get a blade or blower and possibly some other parts. You can email me at [email protected] with anything you may have. I'll be doing a full restore of the machine probably next winter. Will use the summer to gather all needed parts.