-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
1650 hydraulics
- Thread starter mahulvey
- Start date
Help Support IH Cub Cadet Tractor Forum:
mgonitzke
Well-known member
The charge pump relief / implement relief pressures and neutral position are not related to each other. See the service manual for the correct procedure for checking/adjusting both items.
Michael,
Most likely reason your having trouble getting the neutral position adjusted properly is due to wear in the trunnion arm slot on your hydro pump. It likely has wear at each end that needs to be addressed by welding and the two springs and tabs replaced. See the FAQ link. Cub Cadet FAQ If you have access to a MIG welder and are proficient in using it or know someone who is, that is the easiest way to take care of the wear in the slot.
Most likely reason your having trouble getting the neutral position adjusted properly is due to wear in the trunnion arm slot on your hydro pump. It likely has wear at each end that needs to be addressed by welding and the two springs and tabs replaced. See the FAQ link. Cub Cadet FAQ If you have access to a MIG welder and are proficient in using it or know someone who is, that is the easiest way to take care of the wear in the slot.
