• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

kirk engines
xtreme motor works
cc specialties
cadet connection
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Archive through October 21, 2009

    need some advice I replaced the front wheel bearings on my 72 and now the wheel seems to have a lot of sideways play after tightening the screw up. Should I put like washers in the gap to try and take the play out or is there something better or don't do any thing. Thanks still learning all...
  2. D

    Archive through September 30, 2009

    Finally got some time to work on my cub but need some help I have an origanl cub but the problem is I do not have the orignal engine my grand dad up graded to a 10 horse power and diid some other mods to make it fit in. i want to try to get teh Cub back to looking like a 72 or 70 have all the...
  3. D

    Archive through September 07, 2009

    looking to paint my hood that I just got what are some recommandtions on color and tips can only use spray paints don't have a gun yet also tractor will not be a show one I like to use and abuse mine (little abuse) thanks again
  4. D

    Archive through August 27, 2009

    wondering if anybody knows the size of a 72 steering wheel bolt need to re thread mine and don't have the right die for it don't want to waste any more money than i have too thanks
  5. D

    Archive through August 13, 2009

    looking to buy a hood for a 72cc please e-mail me your price thanks in advince
  6. D

    Archive through July 20, 2009

    Porter F. Odenbach not understanding what you mean about the steering wheel could you send me a picture of it thanks maybe that will help
  7. D

    Archive through July 19, 2009

    Need some major help with this one i have a 70 and can't get the steering wheel off to save my life pb blastered it and got a gear puller still can not get it off can't use the hammer method metal to weak bent it allready trying is there any other ways of getting it off. also it does not want to...
  8. D

    Archive through July 19, 2009

    Tony, i would have to think that i would be the starter generator if the switch is good i just had mine repair and it cost me $100.00 well worth it just can't keep mine running that is anthor post. also the regulator will not go bad like you think they do mine is an original off of an...
  9. D

    Archive through April 13, 2009

    question about my 100 runs very rough sounds like a back fire but not sure engine might be running at too high of an idle but it will not run unless at high idle or choke in what might be the problem also soaked the carb in gas for over a week and cleaned it with carb cleaner any help will be...
  10. D

    Archive through March 18, 2009

    need some help with removal if steering wheel I searched how to remove one did like it said sprayed it with pb blaster left it sit for a while and pounded the the nut while me and my dad pulled up on the steering wheel can't do the shole sit on the seat and use your knees I have no seat yet on...
  11. D

    Archive through March 17, 2009

    thanks to everybody that e-mailed me about the seat allready got one and got a front grill but still looking for a steering wheel
  12. D

    Archive through March 17, 2009

    need a steering wheel for a 70 cc or similar that is in good shape no cracks at center hub
  13. D

    Archive through March 16, 2009

    terry i had the same problem and when I tried to fix it went to a couple of dealers and they where not able to get the part for me so what we did was put a inline fuel shut off right at the tanks and ran a fuel line to the carb have no problem it only took like three minutes to fix it all up...
  14. D

    Archive through March 01, 2009

    looking for a housing grill for a 100 or any that would fit must have both bolt holes on the sides does not need to have the grill or hood just need it as a replacement for the one I broke
  15. D

    Archive through March 01, 2009

    need a pan seat for cub 100 or anything that would work in nice shape to small cracks nothing major thanks
  16. D

    Archive through March 04, 2009

    I know this question maybe should not be here but I will try I need a new seat for my 100 and awile back somebody said visit a sponcer just wondering wich one would be better to get a seat from or any other ideas how to get one thanks want close to oem as possible
  17. D

    Archive through February 21, 2009

    well a bulldozer would use a blade that is what I was tought in School for heavy equipment operators but alot of poeple interchange the two words a blade is used for dirt word and a plow is used for snow removal atleast that is what i was told by other people.
  18. D

    Archive through February 09, 2009

    does anybody know if you can make or buy an adapter that would fit a wide frame snowblower on a narrow fram like a 72 cub
  19. D

    Archive through January 29, 2009

    John also there is a shear pin someplace in the clutch area I had the same thing hapeen to me all I had to do was replace a shear pin still to this day have no idea where it is but never had any troubles since. had a repair shop do my repairs just now trying to do them on my own
  20. D

    Archive through January 20, 2009

    I need some advice I have a 72 cub the throttle cable keeps on slipping at the handle where the set screw is. The set screw is in the whole way and tight how can I prevent it from slipping again like it usually does after it slips the first time. getting tired of spending money on a new one when...
Back
Top