jmelicharek
Active member
- Joined
- Sep 14, 2002
- Messages
- 32
- displayname
- Jim Melicharek
Anyone have a photo or suggestion how to add a second hitch to the rear of a garden trailer/cart for towing two garden carts in tandem? Thanks
r
r
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Hitch for towing two garden trailers/carts in tandem?
- Thread starter jmelicharek
- Start date
Help Support IH Cub Cadet Tractor Forum:
Jim,considering the metal in most carts I don't believe I would want to bolt a hitch plate to the bottom.If you wanted to run something stronger from axle supports it might work
Randy..that is about what I was suggesting..looks like it should work...there you go Jim..He used square tube steel and came off the front all the way back...Assuming you can blow up a pic it shows pretty good...
Just remember on the outer tube, you will have to remove the internal weld seam or do what he did and cut a grove in the inner tube outer wall for the seam to slide into, or go out and buy the expensive tubing w/the weld seam removed. There are several youtubes out there on both processes for removing the inner weld seam or groving the outer wall of the inner tube.
It was pretty cool the way it attached to the trailers and did not reduce the value of them. I would believe this could be done to almost any set of trailers.
