• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by ichoplin

cub cadet used parts
kirk engines
cc specialties
shop deals on amazon
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. I

    Archive through July 22, 2009

    Wayne, I put a new petcock on this tank b/c the valve wouldn't close. Was able to find one at my local mower shop. Thanks for the heads-up though. Ian
  2. I

    Archive through July 20, 2009

    Thanks again Kraig, I am using an mower filter. I think I will go out and get a new condenser and points. Ian
  3. I

    Archive through July 20, 2009

    Sorry to double post, but I forgot to ask about the condenser. Are condensers specific for these motors? I have several condensers off automotive distributors lying around. Would they work or really mess something up? It shows that I really don't even know what the condenser's job is. Ian
  4. I

    Archive through July 20, 2009

    Thanks Kraig, There is no sediment bowl on this one, just fuel hose w/ an inline filter and a pet-cock. I didn't check the vent hole specifically, but I did remove the gas cap and didn't notice much difference. How full should an inline filter be? This one isn't even half-full. Thanks for the...
  5. I

    Archive through July 20, 2009

    I've recently resurrected a nice 100. It runs great,mostly. It'll run, then stall and die like it's out of gas. I can pull the bowl off the carb, blow it out w/ carb cleaner and get it running again for a short while. The fuel line and filter are brand new. I know it sounds like trash from the...
  6. I

    Archive through July 19, 2009

    Here are my Cubs(2x100's & 1x149) and one of my Scouts. This Scout is a 78, my other is a 1980(last year for Scout). Needless to say, IH runs pretty thick around here. Ian
  7. I

    Archive through July 17, 2009

    I've had plenty of Cub time since I got home from work yesterday. Anyway, I posted some clutch q's concerning one of my 100's. My t/o bearing replacement went off w/out a hitch thanks the BruceN and MattG's tips(and the archives too). Just wanted to let you guys know that the help is much...
  8. I

    Archive through July 08, 2009

    Thanks for the clutch tips Matt G. Ian
  9. I

    Archive through July 07, 2009

    Thanks Bruce I bought this 100 the day before I came back to work and really didn't have time to dig into it. The tractor is pretty nice and I wanted it, so I took a chance on this clutch issue. Hopefully, I'm not opening up a can of worms. I did a little research and found that some guys...
  10. I

    Archive through July 07, 2009

    Hey guys, I have a newbie clutch question for you all. Some may remember me posting a couple of weeks ago about a 100 I bought. Well, I bought another 100 and the clutch is "out" on this one. I got it from my local CC "expert" and he said the throwout bearing was bad. My question is this, will a...
  11. I

    Archive through July 03, 2009

    Here's a tip for soaking up oil, hy-tran,etc---wool. A friend sent me an old steering box for one of my Scouts and packed the box w/ wool from his sheep. Wool will soak up a ton of liquid and can be rung out and used again. I soaked up all the liquid this way, now I need to cut the residue so...
  12. I

    Archive through July 03, 2009

    Thanks Alan I got it going. I had to take it all apart(again). Don't know what I did wrong the first time. As soon as I had the case apart, the splined shaft was free. Bolted it back together, installed it, and drove it out of my shop. Hopefully after all this, it won't leak. I've got a shiny...
  13. I

    Archive through July 03, 2009

    Update on replacing the front seal on the hydro on my 149. It's back together and full of hy-tran, but I have no movement whatsoever. The hyd lift doesn't work, there's no forward or reverse.When I move the lever to either position, I hear a buzzing noise. I changed the front gasket and the...
  14. I

    Archive through July 03, 2009

    Well, I got my 149 put back together. I bought a cork gasket from CC just to have a solid reference to trace on the neoprene gasket. I also replaced the gasket on the hydro housing. It came apart surprisingly easy. I only had a couple of quarts of hy-tran left, so I won't know if it's all sealed...
  15. I

    Archive through July 01, 2009

    Thanks Robert and Kevin Thanks for the link Cubfaq link too. Are you guys using neopreme for the diff cover too? Or is it not available in sheets that big? I guess I'll find out today when I get some. Thanks again. Ian
See more
Back
Top