Cud Cadet Narrow Frame Rear Axle Info Needed

[ghaynes]

Can anyone out there tell me what the nominal diameter, thickness and the lug bolt thread size is for the Cub Cadet narrow frame tractors? Any help with this would be greatly appreciated............Gary

 

[digger]

Can anyone out there tell me what the nominal diameter, thickness and the lug bolt thread size is for the Cub Cadet narrow frame tractors? Any help with this would be greatly appreciated............Gary

You can find all that info right here.
https://www.cubcadet.com/en_US/ari-partstream.html

 

[kashaver]

7/16 dia. fine thread. I don't understand your 'thickness' but they are approximately an inch long. Charlie probably has them.

 

[ghaynes]

I'm sorry. I poorly stated the info I need. I'm looking for the nominal diameter and thickness of the flange that is welded to the axles on the narrow frames that the rear rim actually bolts to. I know the bolt layout is five on 4.5" bolt circle and from pictures it appears to me the flange is approximately 5" diameter and maybe 1/2" to 5/8" thick but I was hoping for more precise dimensions............Sorry for the confusion...........Gary

 

[John DeBree]

I just checked a Model 70, and the flanges are 3/8" (.385" including paint and rust) thick by 5-3/8" diameter.

 

[ghaynes]

Thanks John....... Thst is exactly what I needed............Gary