• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

cc specialties
kirk engines
cadet connection
cub cadet used parts
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Archive through June 23, 2009

    when i tighten the set screw i have the parking brake locked. hold it in n and tighten the screw until i can't turn it anymore. its good until i push on the bar hard at one point and then it "slips". after i do that its loose. have to push the lever all the way up to where it hits the...
  2. T

    Archive through June 23, 2009

    i'm currently having an issue with my 127. the hydro lever (control) keeps coming loose. i tighten up as much as i can and it keeps slipping. do i need to replace the set screw, the bar it locks on, or the handle itself? any ideas? theo
  3. T

    Archive through January 24, 2009

    model 104 cub cadet 1968 i use it only 4-5 times a year when the snow is bad enough to warrant a snow blower. the battery has been dead for 5 years since i owned it. i have a portable jump box that i used to use to get it running. this last time i put the cables on like normal and it won't...
  4. T

    Archive through May 14, 2008

    got my roll pin punch set. the roll pin for the shaft is the largest size that came with the 6 piece kit. i used it today with a medium sized ball peen and now my roll pin is seated neatly in the shaft connector. thanks folks
  5. T

    Archive through May 14, 2008

    manure spreader?
  6. T

    Archive through May 13, 2008

    anyone retrofit a zerk fitting on the front wheels of a 127? instead of taking the wheel off and packing it full of grease, wouldn't a zerk fitting just be easier? theo
  7. T

    Archive through May 13, 2008

    did that today. almost the entire neighborhood cut their grass. saw a gravely in action, another cub, my cub, a simplicity, and i believe a ford. when i was grilling all i could smell besides the grill was fresh cut grass, sausage/burgers, and hear the sweet sound of mowing/birds/nature...
  8. T

    Archive through May 13, 2008

    its missing a tractor?
  9. T

    Archive through May 11, 2008

    hmmm which gator blades fit a 127 w/ a 48" deck theo
  10. T

    Archive through May 09, 2008

    thats kinda funny. glad there are people with senses of humor theo
  11. T

    Archive through May 09, 2008

    ordered a set of the smaller ones for a start. we'll see how that goes theo
  12. T

    Archive through May 09, 2008

    well worth the $7? might have to do it. would you recommend the shorter set or the taller set? theo
  13. T

    Archive through May 09, 2008

    whats the plus side of using/buying those rubber gromments that raise the seat 1 1/4 or 1 7/8 ". is it a comfort thing or is there other stuff to it?
  14. T

    Archive through May 09, 2008

    i like it because in the event of the pin bag falling over or something like a washer or something falling in there it doesn't rattle or get lost. i cleaned it out from po he had a couple garbage bags, a bunch of golf balls he would find, a couple baseballs, a pliers, a tap, and roll...
  15. T

    Archive through May 09, 2008

    Here is the 3 pieces of rubber matting i put on to save the metal from hitting each other. is there a heat source right under the storage box of a 127? and the lip lost its 2 rubber grommets i had to put a strip down and use machine screws. theo
  16. T

    Archive through May 08, 2008

    check that out a gold plated roll pin punch. i'll settle for my 6 pc craftsman set. it has no sizes listed. hmmm guess we'll find out when it comes in the mail. http://www.sears.com/shc/s/p_10153_12605_00943167000P?keyword=00943167000&sLevel=0 theo
  17. T

    Archive through May 08, 2008

    i ordered a 6 pc set from sears. should be here on the 13th. $20 for the set $25.10 for the complete order with shipping. theo
  18. T

    Archive through May 08, 2008

    woohoo, just sold my snapper today. learned a lesson a 2x4 isn't strong enough to hold a tractor. all we had to load from the bank to his truck were 2x4's. pretty shaky but we got it up there. that being said i think i'm going to look around for another cubby to fill the gap in my garage...
  19. T

    Archive through May 04, 2008

    weird though. i ran my 127 yesterday to cut the small segment near my road and it was fine. there might be some debrie floating in the tank thats choking it out. but it started to choke out even without the pto started for the mower deck. its working good now i'll just let it alone till it...
  20. T

    Archive through May 04, 2008

    hmmm started it up, attached the trailer and it ran fine for over 30 minutes. guess it was just a fluke unless it occurred while i was using the mower deck and the pto belt could be causing it. hmmmm that and the bolt on the hood came loose. the poor 127 is missing the small metal tab...
Back
Top