• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by tbergh

xtreme motor works
kirk engines
cc specialties
Shop deals on ebay
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. T

    Archive through March 12, 2019

    the heck with water i just got buried in snow have a 6 to 8ft drift where my cubs sleep also looking to buy a new generator anyone have a brand they like
  2. T

    Archive through July 12, 2018

    i see what you guys are saying but the problem is the shank will not work in the brinly clamps as they are 3/4 not 1 3/16 whish is what the agri supply hiller kits
  3. T

    Archive through July 09, 2018

    Let me try to explain this in a different way I would like to built a hiller for my brinly toolbar. I have the 3/4 inch bar that mounts in the clamp. I need to weld a pipe at the bottom of the bar for the bolt that disk rolls on wondering what size or type of pipe I should use the bolt is 3/4...
  4. T

    Archive through July 09, 2018

    getting ready to make a hiller for my brinly tt 100 i have the disk and 3/4 inch rod for the clamp what size pipe should i use for the 3/4 bolt to mount the disk
  5. T

    Archive through May 10, 2018

    hi guys i have been gathering parts to rebuild a new block for my cub cadet 123 k301as and i can't seem to find a new dipstick tube what do you all do for one
  6. T

    Archive through April 03, 2018

    hi guys getting ready to start rebuilding a k301as out of a 123 other than removing balance gear and governor gear anything else i should replace thanks thad
  7. T

    Archive through January 08, 2018

    does anyone still make the dipstick for a 1967 cubcadet123 as it is discontinued from kohler
  8. T

    Archive through August 19, 2017

    here is the pictures of the damage http://i345.photobucket.com/albums/p397/thadscub1/bd97d200-c390-4c0e-9365-077ff4ea428f_zpssd5fvyxq.jpg http://i345.photobucket.com/albums/p397/thadscub1/DSCF1941_zpsmqy2o4tz.jpg
  9. T

    Archive through August 16, 2017

    yes i meant conecting rod opened the oil pan bad news broke at the crank took a chuck out of the bore about 1 to 2 inches wide 1/2" or so deep looks like i need a new block anyone orderd thru rfhoutz or cub cadet classics they both have standard bore block
  10. T

    Archive through August 16, 2017

    hi guys iam getting ready to break down my 123 kohler engine it broke the crank other than the governor gear and valve guides and breather filter anything else i should plan on replacing here is the rebuild kit i plan on ordering...
  11. T

    Archive through June 26, 2017

    my problem might be i have the baring flipped when i put it on which part of the inner race goes forward the bigger or smaller side thanks thad
  12. T

    Archive through June 26, 2017

    checked the collar still tight
  13. T

    Archive through June 26, 2017

    hi guys i have a 1a tiller on a cubcadet 122 and i keep having the pto clutch pop of the tractor the set screws are tight and the belt is tight what should i look for
  14. T

    Archive through June 07, 2017

    hi guys i need your help with 2 machines first one is a cub cadet 122 problem iam having is the pto clutch. I replaced the center spring and when i adjusted everything i was tilling with it. And the clutch flew off and broke the clutch disc. what should i look at so this dosent happen again. the...
  15. T

    Archive through April 18, 2017

    had the engine open for new headgasket and the head was decarboned and valve looked good would a bad valve cause the engine to burn oil also how does one check the breather filter
See more
Back
Top