• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by rwagner

shop deals on amazon
cc specialties
xtreme motor works
Advertise with us
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Archive through December 31, 2018

    Happy New Year to all and a great cub year to come!
  2. R

    Allis Chalmers B112

    When I worked at a AC dealer the briggs coils went bad and we would install a automotive coil for better spark.
  3. R

    782D red cub cadet electrical

    The circut breaker provides power to the electrical system via to the switch
  4. R

    782D red cub cadet electrical

    Have you made any progress on your starting problem ? You can look at the wiring diagram on this web site, by the way thanks guys!! The start wire is the red one on the back of ignition switch,check for voltage there when in start position,from there it go's to amp gauge then to circuit breaker...
  5. R

    782D red cub cadet electrical

    Have you checked circut breaker ? Just a idea
  6. R

    Setting the valves on Kubota D600 and others

    Don, hope your daughter surgery went well and all is well. Been there done that.
  7. R

    Setting the valves on Kubota D600 and others

    Don, use .006 feeler gauge and it should have slight resistance. You don't want them to tight because the valves won't seal completly. I try to go in the middle of the spec's. I work on diesels everyday and haven't had any problems.You can look at the manual in the manual section at this...
  8. R

    Model 364 Snow Thrower

    I would look at the parts breakdown and see if there are any bolts that are hidden. Just my 2 cents worth!
  9. R

    Archive through January 18, 2012

    Don you can use a self tapping screw that will go in and grip the zerk and try prying it out or if the screw is the right size and long enough just screw it in and it will hit the spindle and force it out, BTDT
  10. R

    Kt17s series 2 wont run in 782

    I believe Matt & Jeremiah are right about it poss. being the fuel pump. NAPA handles Kohler and their brand fuel pumps and could save you some money.
  11. R

    Archive through December 23, 2011

    MERRY CHRISTMAS TO ALL !!! Hope all have a safe and wonderful Holiday Season!!!
  12. R

    Diesel Swap?

    Joe the parts look-up should show how the pto is mounted and give you a idea how it hooks-up. Also you can go under the manuals look-up and see if it shows the pto set-up. If you need pictures I have a 782D that I can try to get pictures and send them to you.
  13. R

    Dead 1512 Glow Plugs

    the thing that looks like a lightbulb in the wiring diagram is a wire coil that is a indicator that heats up to indicate the heat of the glowplugs. The glowplugs should get 12v even if the indicator is faulty. Joe's testing of the glowplugs is a good test, but also test the voltage the indicator...
  14. R

    Archive through April 28, 2011

    Nic,I think I have a regulater off a kt-17 if you can't find one, but I'll have to check. Let me know, my e-mail address should be in the system. I'll keep checking just in case. thanks Rick
  15. R

    D600 Rear Main Seal

    Bernie, You can go under manuals and look and see what is involved and the correct way to do it.
See more
Back
Top