• FIRST AND LAST NAMES ARE REQUIRED WHEN REGISTERING

New Toy

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

Greg Moody

Member
Joined
May 7, 2022
Messages
8
Location
Branson mo.
BAB0E9FA-F8E6-457C-AE3E-FFB30CB7C6F9.jpeg
 

Greg Moody

Member
Joined
May 7, 2022
Messages
8
Location
Branson mo.
Howdy!I picked up this 2072 yesterday,669hrs got it fired up today ,it’s been setting 5or6 yrs,i can’t get it to move forward or reverse,,any info on what to look for?
 

1811Cub

Well-known member
Joined
Jul 13, 2020
Messages
585
Location
Elkland, PA
First off, welcome!

Second, that appears to be a 1955 Chevrolet Bel Air 2 door post.

Third and most important, check to ensure the hydro pump is turning. Since your unit has power steering, does that function at all? The spirol pins are known to shear, but appear intact on the visible outer portions of the driveshaft. If the pump is turning, make sure you have full clean Hy-tran hydro fluid. If that checks out, replace the spin on hydro unit filter. Also check your shift linkage for correct attachment and worn parts. If all of that checks out, yo have a very rare case of a failed hydro unit. They are fairly simple to tear into.
 

Greg Moody

Member
Joined
May 7, 2022
Messages
8
Location
Branson mo.
First off, welcome!t The shaft is not turning and power steering is not working,,i think it may be a beijing pin,that would cause the mower to be pushed and free wheel i assume..will take the shaft out later today and see👍👍yes on 55 2dr post bel air Thank you for the info

Second, that appears to be a 1955 Chevrolet Bel Air 2 door post.

Third and most important, check to ensure the hydro pump is turning. Since your unit has power steering, does that function at all? The spirol pins are known to shear, but appear intact on the visible outer portions of the driveshaft. If the pump is turning, make sure you have full clean Hy-tran hydro fluid. If that checks out, replace the spin on hydro unit filter. Also check your shift linkage for correct attachment and worn parts. If all of that checks out, yo have a very rare case of a failed hydro unit. They are fairly simple to tear into.
Thank you
C0EA42A1-278C-4D14-AE5A-4284B54F55F2.jpeg
C0EA42A1-278C-4D14-AE5A-4284B54F55F2.jpeg
 

dray

Well-known member
Joined
Jul 20, 2018
Messages
127
Location
Resaca, Ga.
displayname
Donny Ray
Welcome to the gang!!! Nice tractor hopefully your problems will be simple fix.
 

Latest posts

Top