Archive through October 30, 2008
- Thread starter krandall
- Start date
Help Support IH Cub Cadet Tractor Forum:
cengelking
Well-known member
- Joined
- Aug 11, 2006
- Messages
- 174
- displayname
- Chris Engelking
Vampire ag tires 26-12-12 reduced to $200.00. E-mail me or see me Saturday morning.
gschillinger
Member
- Joined
- Feb 18, 2007
- Messages
- 5
- displayname
- George R Schillinger
For Sale
1967 Cub Cadet 122
All equipment is currently used to maintain 4 acre home.
Also available is Brinley plow, disc harrow and broadcast spreader.
Original manuals.
Spring assist lift, 48 in. mower.
Contact:
George Schillinger 1 Christopher Bluffs Ct
[email protected] Oakville, Missouri 63129-5833
Home: 314/846-8220
Cell: 314/616-2463
1967 Cub Cadet 122
All equipment is currently used to maintain 4 acre home.
Also available is Brinley plow, disc harrow and broadcast spreader.
Original manuals.
Spring assist lift, 48 in. mower.
Contact:
George Schillinger 1 Christopher Bluffs Ct
[email protected] Oakville, Missouri 63129-5833
Home: 314/846-8220
Cell: 314/616-2463
kredlinger
Well-known member
- Joined
- Oct 21, 2008
- Messages
- 134
- displayname
- Kyle Redlinger
NEW Kohler carbs for the k161. Only 3 left! $55 each plus ship from east Iowa. Buy all 3 & get free shipping.
kredlinger
Well-known member
- Joined
- Oct 21, 2008
- Messages
- 134
- displayname
- Kyle Redlinger
The k161 carbs are sold. Still have a few of the #30's left over at $115 each, Walbro #64 $95 each, discount if you buy 3 or more! I'm still cleaning the shelves & the plastic tubs out.
IH Cub Cadet 86
Motor does not run.
Piston does not move.
Crank will rotate 360 degrees.
Cylinder wall is smooth.
This could be an easy restoration.
Asking $125
Tractor can be pick up in Middle Point, Ohio.
I can help deliver for gas money.
email address is [email protected]
phone number is 419-968-2409
Motor does not run.
Piston does not move.
Crank will rotate 360 degrees.
Cylinder wall is smooth.
This could be an easy restoration.
Asking $125
Tractor can be pick up in Middle Point, Ohio.
I can help deliver for gas money.
email address is [email protected]
phone number is 419-968-2409
Reggie,
If you do a search for his last name in the "name of author" category, you'll find the other three posts he's made trying to sell it, some with old prices, and with other equipment which may or may not have been sold. It's been listed as a package deal, but the package seems to have shrunk.
Usually, you could also look up some other posts from a person to see what kind of work had been done, how the equipment had been treated, etc., but the only posts made by Mr. Schillinger seem to be the ones for selling this. Just my observation.
If you do a search for his last name in the "name of author" category, you'll find the other three posts he's made trying to sell it, some with old prices, and with other equipment which may or may not have been sold. It's been listed as a package deal, but the package seems to have shrunk.
Usually, you could also look up some other posts from a person to see what kind of work had been done, how the equipment had been treated, etc., but the only posts made by Mr. Schillinger seem to be the ones for selling this. Just my observation.
Nice Original Fenders for Sale. Missing 1 reflector. $250, please email me at: [email protected] or call 606-231-2192
Cub Cadet 102 Roller Excellent Hood, and Grille. $100.00 or trade to Original parts. Please email me at: [email protected] or call 606-231-2192
I have several items I need to pass on to a good Cub Cadet home.
First up is:
1 Pair of Carlisle Super Lug 23-10.5-12 4ply AG tread tires on decent Cub Cadet rims.
Very nice shape, no weather checking or patches/plugs. Put your tractors power to the ground!
$150
1 Pair of 8.5" wheels..(the tires are junk)..these wheels will bolt to a Cub Cadet axle HOWEVER, they have a shallow offset. These will work nicely for a PULLER looking to get the wheels closer to the center of the rear end.
From the back of the mounting surface to the back of the wheel/tire is right at 4.5"...a 'normal' 8.5" Cub Cadet wheel measures 2.5"
$20
I have 2 different Starter/Generators....each of them turn by hand, however I do not know it they are operational.
$15 each...or $25 for the pair
Push Button Points Cover
This came off of the K161 on an Original. The button and grounding spring are intact and operational.
$2
Oil Pan/Engine Base for a K161...this is the correct oil pan for an Original.
Good condition, no cracks
$10
Items are located in west central Ohio.
Prices do not include shipping costs...or items can be picked up here.
Please e-mail me at: [email protected] if you are interested.
Thanks!!
First up is:
1 Pair of Carlisle Super Lug 23-10.5-12 4ply AG tread tires on decent Cub Cadet rims.
Very nice shape, no weather checking or patches/plugs. Put your tractors power to the ground!
$150
1 Pair of 8.5" wheels..(the tires are junk)..these wheels will bolt to a Cub Cadet axle HOWEVER, they have a shallow offset. These will work nicely for a PULLER looking to get the wheels closer to the center of the rear end.
From the back of the mounting surface to the back of the wheel/tire is right at 4.5"...a 'normal' 8.5" Cub Cadet wheel measures 2.5"
$20
I have 2 different Starter/Generators....each of them turn by hand, however I do not know it they are operational.
$15 each...or $25 for the pair
Push Button Points Cover
This came off of the K161 on an Original. The button and grounding spring are intact and operational.
$2
Oil Pan/Engine Base for a K161...this is the correct oil pan for an Original.
Good condition, no cracks
$10
Items are located in west central Ohio.
Prices do not include shipping costs...or items can be picked up here.
Please e-mail me at: [email protected] if you are interested.
Thanks!!
sblunier
Well-known member
- Joined
- Aug 4, 2006
- Messages
- 4,826
- displayname
- Steve Blunier "Mr. Plow" (Central IL)
For Sale:
IH #2 cart.
Decent paint, nice and straight, easy repaint to show quality.
$225
Located in Metamora, IL 61548 Can assist with delivery to Central IL or can bring to National Toy Show in Dyersville, IA on Sat Nov. 8th.
Running out of shed room and this is way down on the priority list to paint.
IH #2 cart.
Decent paint, nice and straight, easy repaint to show quality.
$225
Located in Metamora, IL 61548 Can assist with delivery to Central IL or can bring to National Toy Show in Dyersville, IA on Sat Nov. 8th.
Running out of shed room and this is way down on the priority list to paint.
-I have some NEW Wide 16x6.50x8 Tri Ribs for sale-$130 a set or $134 for Ohio Residents with tax!plus shipping
-Also have a set of NEW 5 ribs 16x6.50x8 $100 plus shipping.
-Tiller belt guard between 90 degree box and top tiller pulley-$50 shipped
-71,1x2,123 headlights with switch-$100 shipped
I can delivery these to the Wapakoneta OHIO swap meet this weekend or next Saturday to the Marietta OHIO area-ITEMS must be paid for ahead of time!!! Paypal and money orders accepted!!
email me at [email protected] or call me at 937-638-2003 AFTER 3:30pm!!!
image{wide tri ribs}
-Also have a set of NEW 5 ribs 16x6.50x8 $100 plus shipping.
-Tiller belt guard between 90 degree box and top tiller pulley-$50 shipped
-71,1x2,123 headlights with switch-$100 shipped
I can delivery these to the Wapakoneta OHIO swap meet this weekend or next Saturday to the Marietta OHIO area-ITEMS must be paid for ahead of time!!! Paypal and money orders accepted!!
email me at [email protected] or call me at 937-638-2003 AFTER 3:30pm!!!
image{wide tri ribs}
M
mkreek
Guest
I have a Cub Original S# 17817 that is in fair shape. I've lost interest in restoring it, thus its for sale. Asking $200 in NW Missouri.
