• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

1282 Electric PTO Question

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mhomrighausen

Well-known member
Joined
Sep 20, 2001
Messages
3,133
displayname
Marlin Homrighausen
A gentleman stopped by this morning and asked if I could help with some questions concerning his 1282. With the steering troubles I could help. His question about the electric pto is one that I couldn't. He said that when he first starts using the pto it will work fine. He said that when it gets warm (hot) engine wise and he shuts the switch off then it won't re-engage until he shuts the engine off and lets things cool down. I asked him if he adjusted the pto according to recommendations and he said yes. Any help is greatly appreciated.
 
this might be a problem along the same lines as when an ignition get its hot it quites working. the electro-magnet coil might be on its way out, but dont qoute me on that. im no expert on electrical gizmos, i would rather have my older mechanical jobs lol
 
If i'm not mistaking I belive there is a relay in the clutch system, I would check that. Heat will cause relays to quit working, possible to much current draw.
 
Back
Top