Recent content by aclark

Does anyone have a twin 17 Kohler that will fit 1983-682. If so can you call me Anthony 859/621/8774

Myron I took this 954-3003A belt back home and SORRY but yes this is the correct belt what happened was the release spring on the mule drive came loose and the drive came down a bit and at first I did not notice it after I put it back together it was fine and also that probably was the reason...

Guys THANKS for your help and input I will double check when I get home this evening I have 954-3003A here in front of me I will try it again sometimes I have a brain fart. Is any one going to portland this weekend to the engine show I here they have a lot of cub parts and ECT I would like to...

Hi All 1983 682 with 44c deck I called local cub dealer for deck belt his part # was 954-3003A 5/8"x89 1/2"this belt is to long so I called back and he assures me this is the correct belt so I look in sponsors above and found part # 754-3027 1/2" x 86" Also I thought I looked at all FAQ's...

Brendan I did not mean to offend anyone and hope no one took it that way I also read FAQ you can learn a lot but some time thing are not black and white and you need the process of elimination my tractor for example says Ih cub cadet 682 red and white one would think that it is an IH but really...

Matthew I also have a 682 that says IH cub cadet from 1981 to 1983 IH contracted with cub to build units for them they was built by cub for IH when I first started on this site some folks are quicker to tell you what you are doing wrong than to help so there for I just don't ask anymore But...

Matt and Matthew Thanks for your input I have never liked to run anything full throttle this almost seems like abuse although I lost a pump on a cat loader for the same reason it also runs at full throttle the kohler has 1083 hours I am afraid of what will happen when I run it hard BUT I will...

Adrian screens are in place and I keep them clean but what I don't do is run at full throttle I usually run half the reason for this is because the engine has 1082 hours and was trying to make it last a little bit longer Thanks Anthony

Hey Guys My 682 after mowing about an hour when you shut it off the engine seems to get VERY HOT you can not hold on to the dip stick to check the oil I removed the heat shields to see if this would help cant tell any change is this normal Anthony

Thanks for the input I am sure I will have more questions this winter while rebuilding Is most parts still available for these machines I would like to keep is all original Anthony

After about an hour of use I start to smell burning oil and a little noise in the engine sounds like a main rattling no smoke out the exhaust while using after you shut down to idle starts smoking a little and then when you shut off in smokes like you poured oil on manifold the last two times I...

I have a 682 and don't know a lot about the attachments what do I need in order to hook a plow to my tractor Anthony

Thanks digger I have checked and double checked I found a web page called tractor specs they say that serial #s 669,971--737,624 year model 81-84 were 682(B) has anyone else seen this Anthony

Thanks Kendall Why does the decals say International cub cadet if it is built by MTD Anthony

I have a red and white ih cub cadet 682 Serial # 713594 I need some parts and would like to know exact year built I would like to keep it all original Thanks Anthony