Rene Smythe
Well-known member
- Joined
- Feb 18, 2022
- Messages
- 69
Looking for a headlamp switch for our 1974 IH Cub Cadet...
-
If you have bought, sold or gained information from our Classifieds, please donate to IH Cub Cadet Forum and give back.
You can become a Supporting Member or just click here to donate.
-
This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.
Sign up here: https://www.ihcubcadet.com/account/upgrades
Parts Wanted Headlamp Switch
- Thread starter Rene Smythe
- Start date
Help Support IH Cub Cadet Tractor Forum:
What part are you looking for?... The entire switch assembly or the knob itself?
What 1974 IH Cub Cadet would that be?
Rene Smythe
Well-known member
- Joined
- Feb 18, 2022
- Messages
- 69
Sorry, memory problems since a stroke. Our Cub Cadet is: 1974 IH Cub Cadet 169. Do not need a knob - thanks for pointing that out...
What's going on w/the switch?.
Terminals broke off the ends or just won't turn on the lights?
If the latter, sounds like the inner contacts are dirty or pitted.
Try turning in on and off, back and forth in rapid succession.
Sometimes the friction from that will clean off the crud and allow contact.
I have taken them apart (very carefully) and cleaned the contacts and made them work again..
Worth a try.
Good luck!
Terminals broke off the ends or just won't turn on the lights?
If the latter, sounds like the inner contacts are dirty or pitted.
Try turning in on and off, back and forth in rapid succession.
Sometimes the friction from that will clean off the crud and allow contact.
I have taken them apart (very carefully) and cleaned the contacts and made them work again..
Worth a try.
Good luck!
Rene Smythe
Well-known member
- Joined
- Feb 18, 2022
- Messages
- 69
On the switch terminal that the wire with the fuse attaches is sparking. I have taken it off, cleaned the terminal but it still will not work. Might try to put a new connector on to see if that helps. Thanks for asking!
What?, it blows the fuse??
That indicates a dead short somewhere down stream from there.
That indicates a dead short somewhere down stream from there.
