• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by Keith Breitenstein

xtreme motor works
Advertise with us
kirk engines
cub cadet used parts
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    Mower deck swap

    I looked you could swap brackets from side to side and also reverse the spring pins to go into the mule and the 3 bolt mounts would align this way putting the straigt side of bracket next to mule holes Both brackets are about 10degrees slop away from the mule and looks to be manufactured this way
  2. K

    Mower deck swap

    Sorry for the confusion the 50a deck is on my 1650 And yes the pins can come out on occasion when backing up or turning or both Thinking about trying to spread rear of mule a little to help If the pins were just a little longer it would not be an issue
  3. K

    Mower deck swap

    The pins don’t stick out of the mule mount very far
  4. K

    Mower deck swap

    I think they are installed backwards I’m going to unbolt remove spring pins and flip from sides Maybe if former owner put back together wrong
  5. K

    Mower deck swap

    My 50a rear mounting brackets have one side slopped at 75 degree angle I don’t know if the former owner reversed the mounting brackets Can’t imagine both are bent the same All images I can find show them straight on both sides Mule does not appear bent Anyone else experienced this Thank you...
  6. K

    Mower deck swap

    Thank you for all the help
  7. K

    Mower deck swap

    Locking to install 50a on a 782 I guess I will need to use the 50a mule and change pulleys from 3/8 to 5/8“ Or can I use the 44c mule with the 5/8 and change the 50a deck pulley to 5/8 from the 44c deck And than what size pto belt would i need same as the 44c 89 1/2” ?
See more
Back
Top