• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by jrlewis

shop deals on amazon
Shop deals on ebay
cadet connection
cub cadet used parts
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Archive through June 20, 2012

    Need THe rear Cast lift for a wide frame I have every thing else,the long control the part that mounts to hydro control arm. My son had his friends were in the shop the next is missing parts.
  2. J

    Archive through April 05, 2012

    Dear Bill Jamison, thank you for posting your knowledge about the wax. That is a real help to me. I have some wheel studs on a cub that are way too tight to get off so I am going to use your method thank you for the help and, you too Harry Hydro for telling me who posted it. Yes, I have used a...
  3. J

    Archive through April 05, 2012

    Harry I have been reading about the wax deal how hot do you get it before you put wax on it? I have missed a couple of the post on it.
  4. J

    Archive through April 05, 2012

    No need to ask where the beef you can see it! What about an extra turbo just for the fun of it.
  5. J

    Archive through April 05, 2012

    GOOD FRIDAY to everyone! I am up on heating pads trying to ease back and hip pain. Need to work on 125, gas tank and put a new shutoff on it the tank filter is stopped up has rust in it. So have a good Easter! I am having the tank cleaned and sealed inside. I is going to a tank shop and have hot...
  6. J

    Archive through April 05, 2012

    Bill do you have use of a tig welder? I welded 2 up for my self with a welding rod that hardened the material and use a carbide burr to even out the hole and a grinder to smooth our the high places. Has held up for 7 years now and 2 sets of motor mounts. Tigging is the best way that way you...
  7. J

    Archive through April 05, 2012

    Is it Friday? I have been having a bad week things keep changing and nothing is working right. I found my 1810 setting in the middle of the yard right before dark, would not start new starter on it and it would not turn it over, then I noticed it was engauged solid. My son in all his wisdom did...
  8. J

    Archive through April 01, 2012

    I noticed that the way my post sounded that I might want the deck lift handle, no it is the rear cast yoke Cub Cadet 719-3024 Lever, Lift. I hope I have it right, it can be in need of repair I don't care. Oh I have the hood replaced now for free.
  9. J

    Archive through April 02, 2012

    David, The grill is missing the IH it was almost dark so I could not tell for sure if it had been on there or not. Just like the back of the fenders no IH there or CC so I am not sure with tag missing, what about motor it is a KT-17 series 1 does that tell us anything?
  10. J

    Archive through April 02, 2012

    My wife will not help me mow until I polish the 582 IH or paint one of my 1450's. She wants to look pretty I guess or is that just a women thing. I use one 1450 it does not look very bad just has the fiberglass dash with a crack in it. Are any 682 IH built, or all of them CC? I have found one...
  11. J

    Archive through April 01, 2012

    Need the wide frame cast lift lever for the rear lift. It looks like my son has hauled off scrap that is yellow or white or red for my cubs. I found out last night 1 hood missing, the rear cast lever and 2 rear ends, not sure what else! Don't care if lift lever needs a repair to it.
  12. J

    Archive through March 29, 2012

    I am in need of pictures of a narrow frame with the hydrolic pump mounted on it. I have a pump but somehing is not right with the way things are going for me. The more pictures the better so I might find out what I am missing or wrong. Thank you men you have been a great help to me.
  13. J

    Archive through March 23, 2012

    Well it is for sure spring. I have a problem with my 582 IH tractor, the thing after I got the mowing deck under it yesterday and mowed with it tried to shut it off and the switch would not kill the engine? What has happened, the key switch was killing the motor before I put deck under it. I...
  14. J

    Archive through March 15, 2012

    Well I have not been back on since I posted my pictures of the 582 and 102. The 582 have changed oil and cleaned out mouse nest getting ready to use a little. The 102 it is in need of head gasket, man passed away while working on it, form what I was told, son knew nothing about torque spec. Glad...
  15. J

    Archive through March 09, 2012

    I was looking at my pictures and noticed that mother nature gave me a bird dropping on the 582. I have here a few pictures of my 102 going to restore.I have correct muffler and clutch cover.Headlights are in another cub 102 I have.
See more
Back
Top