• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by epeterson

kirk engines
xtreme motor works
cub cadet used parts
cc specialties
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. E

    Archive through September 03, 2010

    Thank you all for the direction.
  2. E

    Archive through September 02, 2010

    Hey guys. I hope this is the right spot for this post. The forum layout is different than others I visit. I am an older member that hasent been back here in years. Anyway... I have a 124 with the 12hp Kohler. I use it just for mowing, 48" deck and 4-5 acres. I do the bare minimum to...
  3. E

    Archive through June 20, 2007

    until my service manual arrives.... How do I level 48" deck on my 124?
  4. E

    Archive through June 18, 2007

    when I hold the clutch in the driveshaft spins for a few seconds. its doesnt diengage immediatly. Do I need a clutch kit?
  5. E

    Archive through June 18, 2007

    I solved my clutch mystery. I appreciate your input. I tried to locate the post from last week but couldn't. recap - I wasnt getting any power to the wheels on my 124 in any gear and the clutch wouldnt slow the drive shaft down consistently. It was a sheared pin where the drive shaft goes...
  6. E

    Archive through June 15, 2007

    Hey all, I havent been on in a while cause my 124 has been running great, until... Last night I think my clutch blew. I was mowing down a slope and it just broke loose. it was in gear but not getting any power to the wheels. and rolling strictly on gravity. no smell or smoke just all the...
  7. E

    Archive through March 15, 2007

    Hey all, its been a while but i have a question about my '67 124 IH. my clutch wont stop the shaft from spinning. It takes 10+ seconds. Do I need to re-build? Should I get a clutch re-build kit?
  8. E

    Archive through September 17, 2006

    I tried to attach pic but the files are to big
  9. E

    Archive through September 17, 2006

    My Battery is dead, What kind/size should I put in my 124 w/ 12hp Kohler
  10. E

    Archive through September 10, 2006

    IH CC124 12hp. What kind of attachment can I use to pick leaves up. I dont want to rake. Not enough hours in day to get it done. I just got a trailer for my cub. Its has high sides and the whole thing is held together with codder pins. I can turn it into a flat bed!!! Oh yeh... it has a...
  11. E

    Archive through September 10, 2006

    Thanks!!! I want my iron to last
  12. E

    Archive through September 10, 2006

    Do I need to do anything to prep my IH 124 w/ 12hp for the winter. It has a 4ft deck on it. I probably wont use it from October until March/April
  13. E

    Archive through July 28, 2006

    Thanks Dennis, I found the discussion.
  14. E

    Archive through July 28, 2006

    '67 Cub 124, 12hp When I depress the brake/clutch to change gears it takes 10+ seconds for the shaft to stop spinning so I can shift. Is that normal or is my clutch going? I will have a pic to post up today of my cub.
  15. E

    Archive through July 07, 2006

    Anyone know of a cup holder I can attach to my '67 cub 124. i don't want to duct tape anything. I also would rather not put a plastic holder on my machine. I would like a cup holder that can do justice to my old iron.
See more
Back
Top