• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by cledford

kirk engines
xtreme motor works
cc specialties
cub cadet used parts
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Archive through March 17, 2015

    QL1000 - biggest mowing deck? I've got a line on a nice condition quite-line 1000. It comes with one of the old, small decks. (38A?) My 1450 is down right now and awaiting an engine transplant. I need to mow now and the 1000 is priced reasonably so I was thinking about picking it up...
  2. C

    Archive through April 20, 2013

    Need a VA shop to rebuild k321... I have a k321 that came out of a 1450 that needs to be overhauled. I was wondering if anyone had a referral for a shop that might specialize in these. I'm hoping to find someone in Virginia if possible. I’m pretty much open to driving a reasonable distance...
  3. C

    Archive through July 18, 2012

    Suggestions in VA to get Kohler 321 rebuilt? I've got a Kohler 321 that came out of a 1450 that I'd like to have rebuilt. Does anyone know of someone trustworthy and experienced in Virginia? Thanks! -Calvin
  4. C

    Archive through April 16, 2012

    Thanks Charlie! Good luck with the sale! -Calvin
  5. C

    Archive through April 16, 2012

    Will the lift work on a wide frame or QL? If so, I'll take it. (I understand a motor is required) Calvin
  6. C

    Archive through April 11, 2012

    Is this an internal Brake 3 speed rear end? My long term desire as far as the cub hobby goes would be to rebuild a 1200 like we owned when I was growing up. I've got a rolling carcass of a 1250 and have been keeping my eyes open for 3 speed rear. Is the one pictured an internal brake model...
  7. C

    Archive through April 11, 2012

    Cadet 111?! My wife (God has blessed me with a great one!) has caught sympathetic yellw favor. She saw a yellow tractor for sale on the side of the road and stopped to take pictures for me. It is a "Cadet" model 111. I can't find anything about them. Anyone have any info? Thanks, Calvin
  8. C

    Archive through April 11, 2012

    Hi Harry, Thanks for the advice! The hydro safety switch was disabled by PO and I never fixed it - which is my fault and what led to my first issue, I'm sure it is hard on the tractor to have the starter surge it forward on a hill! Anyhow, your advice is exactly the type I need! I will...
  9. C

    Archive through April 11, 2012

    1450: won’t re-start/no power – any advice on troubleshooting or cause? Yesterday I went out changed the oil in my 1450, greased the deck bearings and mowed for the first time this season. On the way back up to the garage I have to climb a short, but very steep hill that I've not had a...
  10. C

    Archive through April 09, 2012

    Got a Tiny Tach - is WTO 3600 RPM with or without load? I've been waiting forever to have the extra $ to purchase a Tiny Tach. I was finally able to order one 2 weeks ago. I finally got a chance to work on the 1450 over the weekend. I set the throttle at 3600 RPM no load with the tiny...
  11. C

    Archive through April 09, 2012

    Gary, I'm by no manys an expert - but something seems wrong. The front PTO oil seals seem to go easily on these tractors - dad had to do our 1200 at least twice over the years. I got my 1450 for a reasonable deal because it smoked SO BAD from oil spewing from the front PTO seal. I repaired...
  12. C

    Archive through April 09, 2012

    Grease zerk pulled out of 44a spindle - repair possible? I was greasing a bearing/spindle from a 44a deck this evening and the zerk pulled out of spindle. Is there any way to repair this? It's a good bearing otherwise and just need some cleaning. Thanks, Calvin
  13. C

    Archive through March 29, 2012

    Regarding the 44U deck mystery... Well, I haven't been able to find anything re. The 44 U deck. The deck looks exactly like the one in Charlie's pic. It has serial plate in the same place as my 50A. The top is rattle can painted Cub Cadet off white and I can't tell what color it was before...
  14. C

    Archive through March 29, 2012

    Could someone provide details of 44U deck and if it works with a QL? I just got a line on a 44U deck with the sheet metal in great shape. Could someone provide details about this deck? Bearing/spindle types, etc? I thought QL decks were 44A or 50A and the U is throwing me for a loop as...
  15. C

    Archive through March 27, 2012

    50A deck eating belts - anyone know why? I have a 50A rotary mower on my 1450. The first (new) deck beck (not PTO) lasted a single season and broke the last mow of 2010. A 2nd belt (brand new that season) lasted for 2011 season, which was several fewer mows than 2010. Does anyone know...
See more
Back
Top