Search results

I'm just curious if anyone can give me a few pointers on milling splines. I have used a mill before, so I understand how it works, but I need to figure out what cutter to use and where to get it, and how to set everything up to cut the splines. The splines are involute if that makes a...

This isn't the greatest picture in the world, but I think it shows what you want This tractor has been home to a magnum 18 and most recently a command 18 The tractor started life as a 100, but has changed a bit since I hope this picture isn't too big

the engine wasn't really that hot, what you gotta rememeber is that the majority of the power in a lawn tractor goes to the deck, so whe you get rid of that you have excess power, I would just stick with basic stuff and don't wind the engine up much unless you have a steel flywheel Its...

way back when, before I could legally drive I did something like this I used a 12 hp industrial vertical shaft engine, I put a briggs 14.5 hp rod in it, they are a lot stonger and the same size, I took an 11 hp carb and removed the venturi to bore it about 1/8" that gave it awesome throttle...

Sorry wyatt I informed our webmaster, the competition has changed a lot, but the tractors now can't weigh over 850 lbs. w/o the driver Its definately different w/ 4wd, I pull a cub as a hobby with the Mid American Pulling Association here in central Iowa and I had to start from scratch when I...

if you guys wanna see 4x4 garden tractors, head out to the quad city downs in moline illinios on the first weekend of june I am involved with the iowa state 1/4 scale tractor pulling team and the 2003 and 2004 tractors are running modified cub rearends we are also running the most current...