• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Search results

Advertise with us
xtreme motor works
shop deals on amazon
cadet connection
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Archive through April 26, 2005

    David, Nice pics ya got there... Steve, I was told the same thing this weekend..Hydros wont pull! It was my first time, so I didn't do all that hot, but I am happy. 78' with only 15 lbs added in the 1000 lb class. Next time, I'll have some weight brackets made and be able to get the power...
  2. C

    Archive through July 09, 2005

    I have looked in the archives and I'm sure it has been covered but....I can't find it specifically. Maybe a good one for the FAQ section. I know the first numbers in the older cubs are the engine HP, and I know that the last number if odd is hydro/even is gear drive. What is the difference...
  3. C

    Archive through July 02, 2005

    Bryan, if you had anything that difficult to hitch, you could cut a slight notch in the pin to catch on the top. Kinda like when refilling a grease gun. Bruce, I thought about that, but there were two things that came to mind: Three bolts and the hitch is off. I don't have to check the...
  4. C

    Archive through July 02, 2005

    I just finished the hitch on the 122. I know it isn't an OEM hitch, but it sure beats the original sticking a pin in and out and clipping the bottom. I just removed the origial hitch plate and modified that since it will be replaced easily with an original piece. If I had a 3ph or sleeve...
  5. C

    Archive through July 02, 2005

    Oh yeah, I forgot to ask. Am I supposed to put anything on the blade like a wax to make it more slippery? Chad
  6. C

    Archive through July 02, 2005

    Ok, I welded up the pin this morning and also made another quick hitch plate(I have one on the JD in the picture too). Put on the tire chains after I found my air chuck and tried her out.. Impressive, but she will do more. MORE TRACTION CAPTAIN, I NEED MORE. Thinking about filling the tires...
  7. C

    Archive through June 28, 2005

    Charlie, That thing is movin alot of dirt...I bet those AG's help. I tried it today without the chains and I can say that they are a must. I just tried to cut a path in my garden which hasn't been used yet this year. Tires were a slippin along with the clutch at times. I broke one of...
  8. C

    Archive through June 28, 2005

    Charlie, Thanks for the info...I wish I would have had that before I put the blade on, cuz I had the lower bracket off the tractor and had to put it back on! I guess they don't have any info on the adjustment of the rod because it was a fixed and non-adjustable rod. Any recomendations on...
  9. C

    Archive through June 28, 2005

    Any one have any tips for a first time user of a blade for moving/spreading a pile of dirt? I have an original blade for my 122 that I got with the tractor and hooked it up for the first time today. I have some clevis pins on the way from NAPA as one of you posted in the archive to make a new...
  10. C

    Archive through June 23, 2005

    Kurt, Nice find...I am new to the cubs, so to me that seems like a rare option. I have tried to find a list of implements available for them, but not alot around here to choose from. Ya got any thing to run off that PTO? Chad
  11. C

    Has anyone heard from Travis S?

    I have emailed him several times and haven't gotten any response. I would have thought that he might be avoiding me except he hasn't posted in a while. He also mentioned that he was sick when he last emailed me on the 10th of June.... Chad
  12. C

    Archive through June 19, 2005

    Got a few clutch questions...I just replaced the teaser spring on my 122 and am grinding the gears when shifting. I have adjusted the clutch and can see the teaser spring totally off of the rear pressure plate and the disc is free. However when the engine is running especially at higher rpm...
  13. C

    Archive through June 13, 2005

    Hows bout what must be an obvious question to some...What is the difference between a wide frame and a narrow frame. The tech at the cub dealer could not tell me and I don't have but one to compare it to(67' 122). Chad
  14. C

    Archive through June 09, 2005

    Steve, Thanks for the info. BTW, in your post on the 3/4" grade 8 bolts for the pivot pin. Where do you get those and the slotted nut. Do you recall the length and the thread pitch? Chad
  15. C

    Archive through June 09, 2005

    Tom, Just looked on the CC speciality site...I didn't realize that the parts were that cheap and I found the throttle shaft repair kit too. Thanks, Chad
  16. C

    Archive through June 09, 2005

    Kraig Mac, Thanks for the info on the front pto for my '67 122...I replaced the wear button and it works perfectly. Are there any parts available for the fuel sediment bowl? I need the gasket for the bowl and some "packing" for the fuel shut off valve? It smells up the garage pretty bad...
  17. C

    Archive through June 01, 2005

    Kraig, Thanks for the photos, it looks like my thrust button is still good! I ordered the parts today. chad
  18. C

    Archive through June 01, 2005

    Kraig M. Is number 16 the wear button? Ahh....Mine is missing. Diseregard earlier when I said that I thought that I knew how it worked. I don't know what I was thinking. Thanks, I will check to see if a local dealer has one tommorrow. Chad
  19. C

    Archive through June 01, 2005

    **REPOST, dropped off into archive** Hello all, I have been lurking for a while in anticipation of getting an old 122.. Lots of great contributions by all that share and I hope that I can do the same when I get some experience with this thing. I am going to use it to replace my JD165...
  20. C

    Archive through May 28, 2005

    Hello all, I have been lurking for a while in anticipation of getting an old 122.. Lots of great contributions by all that share and I hope that I can do the same when I get some experience with this thing. I am going to use it to replace my JD165 because it is a lot more capable of a...
Back
Top