• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by rjbean

xtreme motor works
cadet connection
Shop deals on ebay
kirk engines
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    Archive through February 25, 2010

    Jim, yes, I understand, but what mule drive is the correct one? Mine has one adjuster, on the right(looking at the front) and both pulleys move the same with that adjuster. Is this the correct mule drive for the mower, tiller, or both? I was given this cub by someone that had no clue about...
  2. R

    Archive through February 25, 2010

    Jeff, yes, it is too tight to get over the pulleys. Jim, I do see your point regarding the size. I didn't think the difference of 3/32" would matter, but I guess it does. I may have to break down and get the correct belt. Does the mule drive make a difference? I seem to remember hearing that...
  3. R

    Archive through February 25, 2010

    Evening y'all... Just getting the 122 ready for tilling (as soon as the ground dries out enough) and I can't get the belt on. This is the belt from the front PTO to the rear 90deg gearbox. The belt I have is a brand new 1/2" x 142.0" belt. I figured this would work, since the original belt is...
  4. R

    Archive through July 03, 2009

    I hqave success!!! My 122 is running. Thanks to all for the suggestions on the broken bolt/ez out issue. I ended up using the diamond dremel bit, with a tungsten carbide dremel bit, and had to re-drill and tap the hole, but I got it done!!!. Now, on to getting the governor to carb linkage...
  5. R

    Archive through June 29, 2009

    Thanks, Kraig and Don, Excellent suggestion, tack welding a nut on.... 2 problems, I don't have a welder (or know how to weld for that matter) and the stud is broken off flush.... Thought about having a nut tack welded in to hold a stud......
  6. R

    Archive through June 29, 2009

    OK guys, I know I never post unless I have a question.... This time it's different. I have a DOH!!!! I found that I had a broken bolt for the Oil Breather stud, and used an EZ out on it. Now, I have a broken bolt WITH a broken EZ Out in it!!!!! I have been told that it would take between...
  7. R

    Archive through May 18, 2009

    Kevin Hill (Kphill) AWESOME!!!! I only had to let it run for about 5 minutes, and it is now working FINE!!!! After 8 years of sitting outside, half assembled, no hope, IT IS RUNNING AND MOVING UNDER IT'S OWN POWER!!!!!! I even drove it around the back yard! Then, I drove it back in the shed...
  8. R

    Archive through May 18, 2009

    Good Afternoon Fellow Cubbers!!!! I know I don't post much. I just read and read and (hopefully) learn from the more knowledgable. I FINALLY got the time to work on my 122. It started and ran for the first time in over 8 years. Blew out a BUNCH of rust from the exhaust. Now, I have to try...
  9. R

    Archive through May 04, 2009

    I have been unable to find one part for my 122. It is the link between the governor and the Carb. Does anyone know where I can get this? I have tried all the sponsors, but none of them show this part. Thanks, Randy
  10. R

    Archive through April 26, 2009

    First, I'd like to thank all who responded to my post about looking for a FEL and Tiller tractor. I got a lot of responses. Secondly, I am currently on hold, looking. Financial restraints at the moment. Third, I have a 'LOOK WHAT FOLLOWED ME HOME' situation. I met one of our forum...
  11. R

    Archive through April 01, 2009

    Good morning fellow CUBBERS!!!!! I don't post often, haven't had time for my lonely, non-running 122. Too many other projects on my 'Honey-Do' list. I am in a spot where i need a NF or WF with a FEL and Tiller.... (Not at the same time, of course..). I'd run the tiller off my 122 with a...
  12. R

    Archive through March 26, 2009

    Luther, Since you REALLY don't need that Hydraulic setup, I'll take it off your hands... Just drop it in the mail to me......
  13. R

    Archive through March 24, 2009

    Mornin' y'all... May be a silly question, but on a rattle can paint job, NOT stripping and priming, how many cans to do 2 coats, approx? This is a 122, and just need the amount of Yellow cans I need ta buy.
  14. R

    Archive through March 21, 2009

    Good afternoon, y'all. I have a 122 that I'm trying to get the mule drive and deck hanger off of. I removed the front bolt, but now I have a slotted head (bolt?) that I can't get a screwdriver on (even if I had one that large). Is this correct, it's on both sides, and if so, what is on the...
  15. R

    Archive through March 01, 2009

    Just a quick question. I am going to try and fab up a cat0 3 point for my 122, and would like to know what the weight limit is on the stock IH top lift bar. I am going to try and attach a top link to it to lift a 3pt tiller that I had given to me. I'll post some pics when I get a working camera...
See more
Back
Top