• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Recent content by cstaehly

cadet connection
cub cadet used parts
cc specialties
xtreme motor works
IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    Archive through March 08, 2014

    Here's a pic of the cub!! Absolutely love this thing!!
  2. C

    Archive through March 08, 2014

    Want to thank all who helped me get my uncles cub 149 operating again, he would be one happy man!! I changed the hydro filter and oil and the valves popped right up and are working great, also I gapped the new wear button to the specs you guys gave me and the PTO works like a champ!! Thanks...
  3. C

    Archive through March 06, 2014

    What can I soak them in from the top? Can anything get by those or can I use pb blaster?
  4. C

    Archive through March 06, 2014

    Mine definitely doesn't look like that!! Super clean but seized up, so I would need to get new O rings and washers before removing or can I use the existing ones and clean well? Would this cause mine to not move and have no hydros?
  5. C

    Archive through March 06, 2014

    So I can remove the large bolts that they are in the center of? These would cause the tractor to not move and no hydraulics? I know it is a release but didn't think I would lose forward and reverse and hydros
  6. C

    Archive through March 05, 2014

    The hydro release valves ARE stuck down!! Thought they would pop up once I got hydraulic pressure in there though, how can I get them to pop back up?
  7. C

    Archive through March 05, 2014

    So I went out to garage to work on cub 149 and now no hydro, won't go forward or reverse and nothing working to lift snowthrower, the fluid was low topped it off but nothing, should I change the filter? Am at a loss....air did come out of plug..
  8. C

    Archive through March 05, 2014

    It seemed like it was set correctly, I will check it tonight just don't want to lose my last wear button, it obviously worked for a bit as the set screw holes were not lined up with slots in basket anymore, thanks
  9. C

    Archive through March 04, 2014

    I got the Pto rebuilt from somebody so I didn't have the tool to check gap but it looked right, would that cause this? I can upload pics later when I get home from work..
  10. C

    Archive through March 04, 2014

    Hey folks, just put my rebuilt PTO on my cub 149 disengaged it and everything seemed to work as it should, fired her up and when I disengaged it it shredded the wear button, at a loss for what could be wrong....
  11. C

    Archive through February 20, 2014

    I will get a new set of t handle Allen wrenches and definitely take my time
  12. C

    Archive through February 20, 2014

    Thanks so much guys, I have been reading non stop so I am aware of the 6 set screws and how difficult they might be, and it always seems if I attempt something, it will probably be difficult!! This forum is the best and I appreciate all the info, looking forward to getting after the PTO, figure...
  13. C

    Archive through February 20, 2014

    The one throw out lever is loose so I have to remove to tighten from the back nut, correct? So I'm just thinking if I have to remove it why not rebuild it? Unless there is a way to tighten that throw out lever without removing, thanks for all the help!!
  14. C

    Archive through February 20, 2014

    What size Allen wrench is used for set screws?
  15. C

    Archive through February 20, 2014

    The wear button on the lever was completely worn, I already used a punch and removed it, was thinking I should just order rebuild kit and take care of it all while I have it removed, wondering if I shouldn't replace throw out levers as well since the one isn't lined up in center anymore...
See more
Back
Top