• This community needs YOUR help today!

    With the ever-increasing fees of maintaining our vibrant community (servers, software, domains, email), we need help.
    We need more Supporting Members today.

    Please invest back into this community to help spread our love and knowledge of all aspects of IH Cub Cadet and other garden tractors.

    Why Join?

    • Exclusive Access: Gain entry to private forums.
    • Special Perks: Enjoy enhanced account features that enrich your experience, including the ability to disable ads.
    • Free Gifts: Sign up annually and receive exclusive IH Cub Cadet Tractor Forum decals directly to your door!

    This is your chance to make a difference. Become a Supporting Member today:

    Upgrade Now

rusty primer

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Joe Williams

Well-known member
Joined
Jun 26, 2022
Messages
79
Location
vincent ohio
I had a guy primer my cub till i get to paint it and he used rusty primer. Now I read you cant use that. What would happen if i painted it with rustoleom paint? There both rustoleom so what is the rusty primer for?
 
The red oxide primer is meant to be used over a surface on which the rust has not been 100% removed. There is no reason you can't use it, particularly if you are topcoating with rustoleum.
 
My results on rusty red primer is the yellow doesn't cover very well, or I didn't apply thick enough coats.
 
Case IH Irongard does not work on rustoleum rusty metal primer!!! I tried it once, and the paint wrinkled up like crazy. Had to strip it down to the metal and start over.
I strongly recommend you try it on a small piece first, to see how it does.
 
I've been using Ospho to stabilize/convert rust for a while..................I let it set much longer than what the directions say, once it is washed off.
 
If using rattle cans, I have found that shooting a coat of flat yellow construction paint first and then shooting the gloss yellow over it helps the coverage quite a bit.
 
IH did not use primer. The red on the cast iron parts is a sealer, Glyptal (sp). All the stamped parts were painted directly.
I have no reason to doubt that. But then the truly anal-retentive perfectionist personality restoring a CC would then want the frame and the cast iron parts to be slightly different tint of yellow. :cubwinker:
 
After the Rustoleum rusty metal primer catastrophe, I only use Rustoleum gray automotive primer. Never had any issues with shades of yellow or white. Of course, I always use Case IH Irongard paint.
When I use the Rustoleum primer up, I will go with another brand of grey auto primer.
Other than the trees reflecting in the paint, anyone see any issues with shade here?

DSCF0442.jpg
 

Latest posts

Back
Top