• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Voltage regulator

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 7, 2021
Messages
8
Location
New York
I have question about voltage regulator. I had read in a previous post, but I can't seem to find it now, about which wire is connected to the terminal on the underside of the replacement regulator. If I remember correctly the "L" terminal is not used, but I can't recall which wire hooks to the terminal on the underside.
 
The terminals are labeled. Find the wiring diagram for your tractor, and connect the proper wires to the proper terminals.

F to F
BAT to BAT
GEN to GEN
L to L (if your model uses the L terminal...some do, some don't)
Most (all?) new regulators I have seen ground through the mounting tabs, so any ground wire should be connected to a mounting bolt.
 
The terminals are labeled. Find the wiring diagram for your tractor, and connect the proper wires to the proper terminals.

F to F
BAT to BAT
GEN to GEN
L to L (if your model uses the L terminal...some do, some don't)
Most (all?) new regulators I have seen ground through the mounting tabs, so any ground wire should be connected to a mounting bolt.
Thanks for the reply. I have to presume the terminal on the underside of the new regulator is where the Gen wire goes because it is not marked. The other terminals are labeled F & Bat. My original regulator has no L terminal just F, Gen.& Bat.
 
Do a search for Roland's fancy wiring diagrams. Once you click on that link, scroll down to your model cub for the wiring diagram. Then scroll all the way down to view the info on the voltage regulators. :bluethumbsup:
 
Thanks for the reply. I have to presume the terminal on the underside of the new regulator is where the Gen wire goes because it is not marked. The other terminals are labeled F & Bat. My original regulator has no L terminal just F, Gen.& Bat.
1655935701901.png
 
Digger , maybe the electric is different when you start the engine. I think we will be telling people that a starter generator polarizes every time you start the tractor for as long as we can by batteries and fuel.
 
Back
Top