• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

Todays mistake

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cubs4lifeofme

Well-known member
Joined
Apr 3, 2020
Messages
1,145
Location
painted post ny
20220912_180706.jpg
q
 
Looks like you are pointing at a Welch Plug. But are you trying to indicate the casting?
Under edit. the second picture just came up. A Welch Plug should have filled that hole. They are available from most good auto parts houses and I'd assume google could be your friend. You'll need to measure the I.D. or if the original came out in one piece, you can measure that.
 
Here are a couple of pics from when I replaced the governor gear in the M18 residing in my 682. The first pic is right after I split the block and found just the bare governor shaft. Second pic is from the blown up KT17 that was originally in my 682 showing the intact original governor gear..

governorgear.jpg


governorgear2.jpg
 
Back
Top