• This community needs YOUR help today. With the ever increasing fees of everything (server, software, domain, e-mail) , we need help. We need more Supporting Members, today. Please invest back into this community to help spread our love and knowledge of IH Cub Cadets. You get a lot of great new account perks including access to private forums. If you sign up for annual, I will ship a few IH Cub Cadet Forum decals too in addition to all the account perks you get. You can see what it looks like below.

    Sign up here: https://www.ihcubcadet.com/account/upgrades

rear hydraulics

IH Cub Cadet Tractor Forum

Help Support IH Cub Cadet Tractor Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dchapel

Well-known member
Joined
Aug 17, 2014
Messages
66
displayname
deryl chapel
has any body installed rear hydraulics hook ups on a 1512 cub? i am thinking about putting t fitting on the front hydraulics lines and run them to the back.
 

Attachments

  • 20201204_182344.jpg
    20201204_182344.jpg
    125.8 KB · Views: 170
The other year I added a two spool valve with rear ports to a 782. Can’t seem to locate pictures but it was pretty easy. Basically remove hoses going to the front port at the valve. Put a hydraulic tee in and reconnect hoses. The rear hoses go into the open side of the tee.

xtrememotorworsells a kit to add.
https://xtrememotorworks.com/Parts Catalog/Hydraulic-Parts-Cub-Cadet.html
Key point is it will only operate one set of ports at a time (front or rear).
 
The other year I added a two spool valve with rear ports to a 782. Can’t seem to locate pictures but it was pretty easy. Basically remove hoses going to the front port at the valve. Put a hydraulic tee in and reconnect hoses. The rear hoses go into the open side of the tee.

xtrememotorworsells a kit to add.
https://xtrememotorworks.com/Parts Catalog/Hydraulic-Parts-Cub-Cadet.html
Key point is it will only operate one set of ports at a time (front or rear).
1512's have dual ports in for angle blades, so with the splitter, you can do both separately. Same with a QL dual stick if you put another valve inline. (y)
 
i put the new gauges in. cast rear end with fine spline axels and new carrier . and other up dates the frame had a lot of cracks in it at trans mounts added cub 108 side frame sides now it has 1/4 " rails
 

Attachments

  • Cub 1512.4.jpg
    Cub 1512.4.jpg
    98 KB · Views: 161
  • Resized_20210107_191732.jpeg
    Resized_20210107_191732.jpeg
    38.3 KB · Views: 155
  • 20210125_203654.jpg
    20210125_203654.jpg
    66.4 KB · Views: 166
  • 20210108_180240.jpg
    20210108_180240.jpg
    87.6 KB · Views: 167
  • 20201230_183612.jpg
    20201230_183612.jpg
    44 KB · Views: 175
  • Rust-oleum Tuscan yellow .jpg
    Rust-oleum Tuscan yellow .jpg
    42.6 KB · Views: 206
and some up grades I made
 

Attachments

  • 20210128_203952.jpg
    20210128_203952.jpg
    54.4 KB · Views: 184
Back
Top