• FIRST AND LAST NAMES ARE REQUIRED WHEN REGISTERING

QA-42A blower belt size

Help Support IH Cub Cadet Forum:

John Wheeler

Active member
Joined
Jan 19, 2022
Messages
38
Location
Willoughby, Ohio
4” pulley. I’m assuming factory diameter. Can’t find proper belt size. Admittedly haven’t looked real either. 1/2”X30”ish sound about right? Also looking for a reason to post. Thanks 👍🏼
 

Jay Fetters

Well-known member
Joined
Jan 26, 2021
Messages
292
Location
U.P. Michigan
I think the belt you need is 15/32x28. But if you click on the link to cc specialties at the top of this page(they are a sponsor to this forum and help make this community possible), then click on site navigation, and then click on belts. Then finally scroll through his page to find your belt. You'll also have to look at the pto clutch to make sure it's standard size. If someone before you put an aftermarket pto on, it may be a non standard size pulley, which will affect belt length.
 

digger

Administrator
Staff member
Administrator
Moderator
IHCC Sponsor
Joined
Jun 22, 2002
Messages
15,748
Location
Park Rapids Mn.
displayname
Digger
4” pulley. I’m assuming factory diameter. Can’t find proper belt size. Admittedly haven’t looked real either. 1/2”X30”ish sound about right? Also looking for a reason to post. Thanks 👍🏼
No way to tell you what size the belt is without knowing what tractor it's going on.

 

John Wheeler

Active member
Joined
Jan 19, 2022
Messages
38
Location
Willoughby, Ohio
I think I figured out the painfully obvious! 🤦🏻‍♂️🤷🏻‍♂️ I have the “42A”, not the “42”. 15/32”X30”. Does this seem accurate to the knowledgeable ones? My tractor is also a ‘77. I’ll guess so is my mower deck. Was this a popular combo package from the dealer? It seems like the standard package being sold these days. I’m new here and something I picked up on. Thanks again! 👍🏼
 

Attachments

  • A48C6842-1813-4584-BC95-CB2E1D339AEF.jpeg
    A48C6842-1813-4584-BC95-CB2E1D339AEF.jpeg
    84.4 KB · Views: 45

digger

Administrator
Staff member
Administrator
Moderator
IHCC Sponsor
Joined
Jun 22, 2002
Messages
15,748
Location
Park Rapids Mn.
displayname
Digger
I think I figured out the painfully obvious! 🤦🏻‍♂️🤷🏻‍♂️ I have the “42A”, not the “42”. 15/32”X30”. Does this seem accurate to the knowledgeable ones? My tractor is also a ‘77. I’ll guess so is my mower deck. Was this a popular combo package from the dealer? It seems like the standard package being sold these days. I’m new here and something I picked up on. Thanks again! 👍🏼
The 55053 is the correct belt. (y)
 

Latest posts

Top