Quantcast
Kirk Engines, Inc Cub Cadet Used Parts CADET CONNECTION Cub Cadet Specialties Cub Cadet Specialties

Northern NJ Cubs for sale

Help Support IH Cub Cadet Forum:

thill

Well-known member
Joined
Feb 27, 2007
Messages
70
displayname
Tom Hill
I have a couple of rolling chassis and a whole lot of parts that I need to move out.

A 169 with Hydraulic Lift, motor had a connecting rod break and the motor is out and partly disassembled but included as well. $750 - Painted a tasteful orange instead of Cub Yellow (SORRY I got it that way!).

A 169 with Manual Lift, motor had a connecting rod break and the motor is in the frame. $850 - Original colors.

A 125 with another connecting rod broken, motor is out of tractor and partially disassembled, possible hard to shift trans issue. - $400

A deck & hanger is available for each of the above.

Got a couple of front blades & hangers - $100 - $200

A IH Cub Trailer (#2 or #4) that has life but will need tires (think I have cheap new ones and will include) solid but has surface rust. - $100

A 42" Snow Thrower - all there and have an additional mount, needs work - $250

Spare parts like a Steering Column, Hydro Drive, Rock Shaft, Tunnel Covers, Front Axle, Spare Wheels, Hydro Lines & more.

Come and make me a deal on all of it!
 

thill

Well-known member
Joined
Feb 27, 2007
Messages
70
displayname
Tom Hill
Anyone able to get to Northern NJ to look?
 

Ron Armbruster

Well-known member
Joined
Oct 3, 2020
Messages
128
Location
Powell Ohio
displayname
DontknowJack
Maybe. The wife likes road trips. Anyone know what town? Helps me figure out travel time. Tom, where are located?
 

thill

Well-known member
Joined
Feb 27, 2007
Messages
70
displayname
Tom Hill
Maybe. The wife likes road trips. Anyone know what town? Helps me figure out travel time. Tom, where are located?
Newton, NJ 20-30 minutes from border with PA at Route 80. Country part of NJ.

Not here until mid next week.
 

thill

Well-known member
Joined
Feb 27, 2007
Messages
70
displayname
Tom Hill
Back in NJ for a few days then away for the weekend. back on Monday Morning 11/2, solid for a few weeks.
 

dhcary

New member
Joined
Jun 16, 2017
Messages
4
displayname
Dean Cary
I have a couple of rolling chassis and a whole lot of parts that I need to move out.

A 169 with Hydraulic Lift, motor had a connecting rod break and the motor is out and partly disassembled but included as well. $750 - Painted a tasteful orange instead of Cub Yellow (SORRY I got it that way!).

A 169 with Manual Lift, motor had a connecting rod break and the motor is in the frame. $850 - Original colors.

A 125 with another connecting rod broken, motor is out of tractor and partially disassembled, possible hard to shift trans issue. - $400

A deck & hanger is available for each of the above.

Got a couple of front blades & hangers - $100 - $200

A IH Cub Trailer (#2 or #4) that has life but will need tires (think I have cheap new ones and will include) solid but has surface rust. - $100

A 42" Snow Thrower - all there and have an additional mount, needs work - $250

Spare parts like a Steering Column, Hydro Drive, Rock Shaft, Tunnel Covers, Front Axle, Spare Wheels, Hydro Lines & more.

Come and make me a deal on all of it!
I have a couple of rolling chassis and a whole lot of parts that I need to move out.

A 169 with Hydraulic Lift, motor had a connecting rod break and the motor is out and partly disassembled but included as well. $750 - Painted a tasteful orange instead of Cub Yellow (SORRY I got it that way!).

A 169 with Manual Lift, motor had a connecting rod break and the motor is in the frame. $850 - Original colors.

A 125 with another connecting rod broken, motor is out of tractor and partially disassembled, possible hard to shift trans issue. - $400

A deck & hanger is available for each of the above.

Got a couple of front blades & hangers - $100 - $200

A IH Cub Trailer (#2 or #4) that has life but will need tires (think I have cheap new ones and will include) solid but has surface rust. - $100

A 42" Snow Thrower - all there and have an additional mount, needs work - $250

Spare parts like a Steering Column, Hydro Drive, Rock Shaft, Tunnel Covers, Front Axle, Spare Wheels, Hydro Lines & more.

Come and make me a deal on all of it!


Tom,
I live about 15 miles from Newton, in Lake Hopatcong NJ. I have a beautiful 383 Hydro in mint condition that I have been thinking about selling. There were very few 383 models built and it is truly a rare collectors item. (Original yellow and white paint). I want it to go to someone who is a 'collector' and will show it or at a minimum, take excellent care of it.
Do you mind if I jump onto your posting and perhaps make this a "Two For One" where it may give some potential buyers additional justification and incentive to make the trek to northern NJ, whereas they may not want to drive all the way here just for your items. Don't mean to step on your posting, so if you are okay with that, let me know and I will post some pictures of my little beauty. Ha!
Thanks
Dean Cary
 

dhcary

New member
Joined
Jun 16, 2017
Messages
4
displayname
Dean Cary
Hi, Gerald
I live about 15 miles from Newton, in Lake Hopatcong NJ.
I have a beautiful 383 Cub Cadet Hydro in mint condition that I have been thinking about selling. There were very few 383 models built and it is truly a rare collectors item. (Original yellow and white paint). I want it to go to someone who is a 'collector' and will show it or at a minimum, take excellent care of it.
I read your posting to Tom regarding his parts, and perhaps you could make your trip here to NJ a "Two For One" since you will be about twenty minutes from my home from Toms.
Here is are a couple of pictures of my little beauty!

You can can also email me at DeanCary@Verizon.Net
Thanks
Dean Cary
 

Attachments

Latest posts

Top